Download Download Allen & Heath dLive DM64 Digital Mixer Firmware 1.97 for OS Independent Free

repair:

– Ducker now shows the correct gain reduction value when key audio is muted.

Improve:

– Support for the latest Surface hardware after component changes.
– Support for latest Dante card hardware after component changes.
– IP controller browser settings page can now be disabled.

Known issues:

– In some cases, MixRacks with the latest component changes may need to be rebooted after a firmware update.
– Director can display offline configuration when connected to MixRack when DX box configuration is “connected” offline.
– Connecting the ME Personal Mixing System to the DX2 socket on the GX4816 is not supported.
– PAFL delay reset after mixer configuration change.
– Restarting Director was required to connect to the IP controller when offline before going online.

To update the firmware on a connected Surface:

1. Download the latest firmware and save the .zip file.
2. Remove any previous dLive firmware from your USB drive. To do this, look in the USB AllenHeath-dLive folder and delete the existing Firmware folder and Firmware.md5 file. Do not delete other files or folders.
3. Extract the .zip file to the root directory of the USB drive. Do not change the folder name or browse the Firmware folder, as doing so may result in corrupted firmware. Attempting to navigate or open files in this directory may cause your operating system to leave behind small temporary system files that can invalidate your firmware.
4. Safely remove the USB drive from your computer.
5. Connect the dLive Surface to the dLive MixRack via gigaACE or network. To do this, plug a Cat5 cable between one of the Surface gigaACE/network ports and one of the MixRack gigaACE/network ports.
6. Insert the USB flash drive into the dLive USB port, then click Update on the Firmware page. The dLive will reboot to the Bootloader screen and if valid firmware is found on the USB drive, the current version and details of the version found on the drive will be displayed.
7. Touch the Update button. Do not interrupt the process. Failure to complete the transfer may result in corrupted firmware. Make sure that the main power supply and connecting cables are reliable and that the system is not disturbed or shut down during the update process.
8. After the firmware is successfully installed, the system will automatically restart.
9. After the system has fully booted, invoke the template display or user display to restore your settings.

To update the firmware without your Surface connected:

1. Download the latest firmware and save the .zip file.
2. Delete all previous dLive firmware from your hard drive. To do this, find the AllenHeath-dLive folder and delete the existing Firmware folder along with the Firmware.md5 file. Do not delete other files or folders.
3. Extract the .zip file to a directory on your hard drive. Do not change the folder name or browse the Firmware folder, as doing so may result in corrupted firmware. Attempting to navigate or open files in this directory may cause your operating system to leave behind small temporary system files that can invalidate your firmware.
4. Open a web browser and enter the IP address of the mixer in the address bar (default: 192.168.1.70)
5. Select Choose File
6. Choose where you extracted the firmware and navigate to: AllenHeath-dLiveFirmwareTLD-MixRackFirmware
7. Select Firmware.tar.xz and press Open
8. Select Update
9. Wait for the MixRack to update. Do not interrupt the process. Failure to complete the transfer may result in corrupted firmware. Make sure that the main power supply and connecting cables are reliable and that the system is not disturbed or shut down during the update process.
10. After the firmware is successfully installed, the MixRack will automatically restart.
11. After the MixRack restarts, the new firmware version will be displayed in the browser window
12. Recall a template show or user show to restore your settings.

About DJ Mixer update:

Updating the console’s firmware version can add support for newly developed features (or improve existing ones), enhance audio quality and transitions, fix different issues such as various noises heard in certain situations, and many Other related improvements.

However, before downloading this package, go to your device’s system information and make sure that the currently installed firmware is neither newer nor matches this version. Also, you should be aware that a failed update could seriously damage the console’s software, so it is important to be familiar with the installation steps.

As for applying this release, you must transfer the downloadable package (or its contents) to the mixer via any available method and boot the device via various key combinations to enter update mode (make sure you read the product’s user guide ).

That said, if you’re considering installing this release and you’re confident you have all the knowledge you need to upgrade successfully, download the package and apply it to your console. Please check our website frequently so you don’t miss any updates that improve your device.