Download Download Microsoft Surface Go 2 Tablet Firmware/Driver 23.024.31080 for Windows 10, Windows 10 64 bit Free

firmware:

-ish: 3.1.0.4101
– Me: 11.8.92.4222
– PD: 2.6.0.0
– Touch: 64.26.00.00
– UEFI: 1.0.24
– TPM: 7.2.2.0

driver:

– HD Audio: 6.0.8828.1
– HDAudioExtension: 6.1.0.1
– Dolby Audio Premium: 4.1211.929.55
– Dolby SWC: 3.20602.630.0
– SmartSoundBus: 01.00.170.00
– SmartSoundBus: 09.21.00.4187
– SmartSoundBus: 09.21.00.4187
-AVStream: 30.18305.6.11616
– CSI2 Host Controller: 30.18305.6.11616
– FrontIRSensor: 30.18305.6.11616
– Front sensor: 30.18305.6.11616
– Rear sensor: 30.18305.6.11616
– Signal Processor: 30.18305.6.11616
– Skc controller: 30.18305.6.11616
– Graphics: 27.20.100.8681
– Graphics: 27.20.100.8681
– Graphics: 10.27.0.9
– Panel Calibration: 1.0.3.0
– SurfaceDigitizerVirtualFunction: 1.3.139.0
– Surface Display: 2.0.1.3
– Bluetooth: 22.60.0.6
– Location: 21.2040.0.1
– Location: 21.2040.0.1
– Wi-Fi: 22.60.0.6
– pie chart: 21.1060.0.1
– pie chart: 21.1020.0.1
– Surface Ethernet: 10.12.0604.2019
– SurfacePenFw update: 1.1.139.0
– SurfacePenIntegration: 1.2.139.0
– SurfacePenPairing: 4.5.139.0
– Battery: 1.29.137.0
– Card reader: 10.0.18362.21317
– Chipset AMLLake: 10.1.10.4
– Chipset LP: 10.1.5.2
– Chipset LP: 10.1.5.2
– DPTF: 8.6.10402.11528
– DPTF: 8.6.10402.11528
– Hide filter: 2.2.1.377
– ISH BusDriver: 3.1.0.4101
-ish HECI: 3.1.0.4101
– ISH HID PCI: 3.1.0.4101
– Supervisor Engine: 2145.1.42.0
– Management Engine Extensions: 1952.14.0.1470
– Management Engine ICLS: 1.63.1155.2
– NFC: 12.0.5.0
– Serial IO: 30.100.1914.3
– Serial IO: 30.100.1914.3
– Serial IO: 30.100.1914.3
– Surface Settings: 1.0.13.0
– Surface Virtual Bus: 1.5.139.0
-SurfaceCapsuleNull:1.0.0.0
– SurfaceDock2 Firmware: 5.5.0.0
– SurfaceCFUOverHID: 2.49.139.0

The following drivers are for LTE only:

– qcgnss:12.7.2.913
– qcqmux: 23.34.28.226
– qcqmuxusb:10.28.30.873
-qmuxwinusb:14.3.18.577

notes:

– When Surface updates are offered through the Windows Update service, they are delivered to Surface customers in stages. Therefore, not every Surface will receive the update at the same time, but the update will be delivered to all devices. If you haven’t received the update, please manually check for Windows Update later.
– If you update the operating system on your Surface, this will clear your existing update history.
– Firmware updates cannot be uninstalled or reverted to an earlier version.
– When you install the latest update, if your Surface doesn’t already have previous updates, you’ll also get them. Only updates for Surface will be downloaded and installed.
– After installing the update, restart your device to complete the installation process. To restart your device, select the Start button, then select Power > Restart.

About tablet firmware:

By applying this firmware, your tablet can benefit from improved system stability, network-related features and performance, an enhanced touch experience, various fixes for issues encountered during device use, and several other changes.

The installation process isn’t too cumbersome, as every manufacturer tries to make it as easy as possible: usually, you have to transfer the new firmware to the tablet, then initiate the upgrade from the settings menu.

However, due to the large number of tablets and manufacturers, there are various ways to enter the update mode. It is recommended that you read the installation guide first and familiarize yourself with the steps before upgrading.

Remember that before you get this version, you must check that a usable firmware has been developed for your tablet model and SKU (stock keeping unit) – if you apply incompatible software, the device will experience serious malfunctions , and may even become unusable.

So, if this package was developed for your tablet, click on the download button, refer to the update instructions and apply the new firmware. Also, don’t forget to check our website often so you don’t miss any new releases.