Download The Dude 7.11 Beta 4 Download

Alternatively, you can download the latest stable version of this software.

It will automatically scan all devices within specified subnets, draw and map your networks, monitor the services of your devices, and notify you in case a service has problems.

Characteristics

• The Dude is free!
• Automatic network discovery and layout
• Detects any type or brand of device
• Device, link monitoring and alerts
• Includes SVG icons for devices, and supports custom icons and backgrounds
• Easy installation and use
• Allows you to draw your own maps and add custom units
• Supports SNMP, ICMP, DNS and TCP monitoring for devices that support it
• Monitoring of individual link usage and graphs
• Direct access to remote device management tools
• Supports remote Dude server and local client
• Runs in Linux Wine environment, MacOS Darwine and Windows
• Best price/value ratio compared to other products (free)

What is new

• Bluetooth – added “Decode-ad” command for decoding raw bluetooth payload (cli only);
• Bluetooth – added “Peripheral Devices” section showing decoded eddystone tlm and uid, ibeacon and mikrotik bluetooth payloads;
• Bridge – added warning when vlan interface list contains non-bridged ports;
• Bridge – prevent bridging of the vlan interface created on the same bridge;
• Console – fixed incorrect default value for “:return” command (introduced in v7.11beta2);
• Console – improved stability and responsiveness;
• Container – fixed duplicate image name;
• Dns – improved system stability when processing static DNS entries with specified address list;
• Ipsec – improved ike2 rekey process;
• Ipsec – check correct ph2 authentication validity when using ike1 exchange mode;
• L3hw – changed minimum supported values ​​for “Neigh-discovery-interval” and “Neigh-keepalive-interval” properties;
• L3hw – fixed /32 and /128 route unloading after next hop change;
• L3hw – fixed incorrect mac source usage for unloaded binding interface;
• L3hw – improved system response during partial unloading;
• L3hw – improved system stability;
• LEDs – flashing red system led when lte is not connected to the network on d53 devices;
• LEDs – fixed system led color for “Gsm egprs” rat on d53 units;
• Lte – fixed dell dw5221e “At-chat” support;
• Lte – listen only to dhcp packets for lte passtrough interface in auto mode when searching for the host;
• Package – treat disabled packages as enabled during upgrade;
• Profile – added “Container” process classifier;
• Profile – correctly classify “console” related processes;
• Quickset – use the configuration correctly when using the “Dhcp server range” property;
• Rose storage – added “Scsi-scan” command (cli only);
• Route – added comment for bfd configuration (cli only);
• Route – convert bfd timers from milliseconds to microseconds after upgrade;
• Sfp – improved optical qsfp interface handling for 98dx8332, 98dx3257, 98dx4310, 98dx8525 switches;
• Wifiwave2 – fixed “Reg-info” information for several countries;
• Wifiwave2 – fixed interface hangs on ipq6010 based cards (introduced in v7.9);
• Wifiwave2 – rename “Reg-info” country argument from “Macedonia” to “North Macedonia”;
• Winbox – fixed “Storm rate” property under “Switch/port” menu;
• Winbox – fixed bgp affinity screen;
• Wireless – ignore eapol logout frames;
• X86 – updated e1000 driver;

Other changes since v7.10:

• Api – do not allow to execute commands without required parameters;
• Bfd – fixed “Actual-tx-interval” value and added “Remote-min-tx” (cli only);
• Bluetooth – added new ad structure type “Service-data” for bluetooth advertising;
• Bridge – added more stp related logging;
• Bridge – fixed mstp bpdu aging;
• Bridge – fixed mstp sync after link down;
• Certificate – permanent import of pem;
• Certificate – restored rsa with sha512 support;
• Console – added default value for “Rndstr” command (16 characters from 0-9a-za-z);
• Console – fixed minor typos;
• Console – fixed missing “Parent” for script jobs (introduced in v7.9);
• Console – fixed missing return value for ping command in certain cases;
• Console – fixed print interval when changing the size of the terminal;
• Console – improved flag printing in some menus;
• Console – improved timeout for certain commands and menus;
• Console – improved vpls “Cisco-id” argument validation;
• Container – added option to use overlay layers;
• Discovery – fixed “Lldp-with-net-policy-vlan” (introduced in v7.8);
• Ethernet – improved interface stability for crs312 device;
• Fetch – improved timeout detection;
• Firewall – added warning when pcc divider argument is less than remainder;
• Firewall – fixed missing “Mark-connection” with “Passthrough=yes” rule for tcp first packets;
• Graphs – added paging support;
• Health – added more gradual control of fans for crs3xx, crs5xx, ccr2xxx devices;
• Health – export fixed configuration for “/system/health/settings” menu;
• Ike2 – improved system stability when closing phase1;
• Ike2 – improved system stability when making configuration changes on active setup;
• L3hw – improved system stability during ipv6 route offload;
• Led – fixed manually configured user led for rb2011;
• Lora – added new eui field;
• Lora – moved the lora service to the iot package;
• Lora – properly apply configuration changes when multiple lora cards are used;
• Lora – updated lora firmware for r11e-lr8, r11e-lr9 and r11e-lr2 cards;
• Lte – added “At-chat” support for dell dw5821e-esim modem;
• Lte – added extended support for neoway n75 modem;
• Lte – fixed no sinr reporting for chateau 5g;
• Lte – fixed telit le910c4 “At-chat” support;
• Lte – improved interface start time for sxt lte 3-7;
• Mpls – improved mpls tcp performance;
• Mqtt – added more mqtt publishing configuration options;
• Mqtt – added new mqtt subscription feature;
• Netwatch – added “Src Address” property;
• Netwatch – changed “Thr-tcp-conn-time” argument to time interval;
• Ovpn – fixed ovpn server peer-id negotiation;
• Ovpn – fixed session timeout when using udp mode;
• Ovpn – properly close the ovpn session on the server when the client disconnects;
• Poe – fixed missing poe configuration section under specific conditions;
• Pppoe – fixed pppoe client trying to establish connection when parent interface is idle;
• Rose storage – added disk statistics for ramdisks;
• Rose storage – fixed raid 0 creation;
• Rose storage – limit striped raid item size to minimum disk size;
• Router Card – fixed “Gpio function” setting on rbm33g (“/system router card upgrade” required);
• Router card – improved router boot stability for alpine CPU (“/system router card upgrade” required);
• Router card – removed unnecessary serial port for netpower16p and hap ax lite devices (“/system router card upgrade” required);
• Sfp – improved interface stability for 98dx8208, 98dx8212, 98dx8332, 98dx3257, 98dx4310, 98dx8525, 98dx3255, 98px1012 based switches;
• Ssh – imported private key for permanent user rsa;
• Switch – fixed “Reset-counters” for “Switch-cpu”;
• System – do not allow setting a non-existent CPU core number for system irq;
• System – increased maximum supported CPU core count to 512 on chr and x86;
• System – reduced ram usage for smips devices;
• W60g – improved stability for cube 60pro ac and cubesa 60pro ac units;
• Webfig – added option to enable wide view in item list;
• Webfig – use your router’s time zone for date and time;
• Wifiwave2 – added “Steering” parameters and menu to set up and monitor ap neighbor groups (cli only);
• Wifiwave2 – added more information about roaming candidates to bss transition management requests (802.11v) and neighbor report responses (802.11k);
• Wifiwave2 – added option to filter frames captured by sniffer command (cli only);
• Wifiwave2 – changed default behavior for handling duplicate client mac addresses, added settings to change it (cli only);
• Wifiwave2 – enabled pmk caching with eap authentication types;
• Wifiwave2 – fixed “Security.Sae-max-failure” rate not limiting authentications correctly in some cases;
• Wifiwave2 – fixed clearing capsman common name when disabling “Lock-to-caps-man”;
• Wifiwave2 – improved stability when changing interface settings;
• Wifiwave2 – improved stability when receiving malformed wpa3-psk authentication frames;
• Wifiwave2 – make information log less detailed during client roaming (some information moved to wireless, debug log);
• Wifiwave2 – use correct status code when rejecting wpa3-psk re-association;
• Winbox – added missing status values ​​for ethernet and cable test;
• Winbox – added warning about probe not running due to “Startup-delay”;