Download Lexmark C2325 MFP Firmware CSNZJ.074.250/ZJ.074.E010 for OS Independent
Download Free Download Lexmark C2325 MFP Firmware CSNZJ.074.250/ZJ.074.E010 for OS Independent
Fixed field issues and other improvements:
– Universal printing improvements: see KB article SO8942
– Upgrade the integrated SMB client to a new version with SMBv3.1.1 support
– Resolved an issue where the device control panel becomes slower over time but resumes normal operation after restarting
– Fixed intermittently missing color plane (s) on high coverage pages for CS / CX331 / 431 devices
– Reduce fan noise at the end of a print job with Lexmark MS32x / MS42x / MS52x / MS62x and MX32x / MX42x / MX52x / MX62x Series printers
– Correction of a “paper jam, left door B. [439.19B]”when changing between linked trays when printing / copying with an inline staple finisher installed
– Added support for standard mountain time (without daylight saving time)
– Native Cloud Connector improvements
– Reduced error codes 900.00
– Fax improvements
– Reduce printing emulator errors (PS, PCL and PDF as appropriate)
Firmware Upgrade Warning:
– Updating devices to FW7 code may take up to 20 minutes if the current code level on the device is based on FW2 or FW3
– This is a one-off problem when switching the device from FW2 or FW3 to FW7
– To find out whether the device is currently executing a code based on FW2 or FW3, check the firmware version on the device. Code based on FW2 and FW3 will have the following version format: ATL.03x.yyy or ATL.02x.yyy, CB.03x.yyy or CB.02x.yyy, PP.03x.yyy or PP.02x.yyy, YK. 03x.yyy or YK.02x.yyy
Firmware Upgrade Procedure:
– Devices running ATL.03x.yyy or ATL.02x.yyy firmware (CS72x / CX72x and equivalents) must first update to an intermediate version before upgrading to FW7
– Intermediate version needed is CSTAT.041.090 or CXTAT.041.090, from there the firmware can be updated directly to FW7
– Contact Lexmark Technical Support to obtain this version
Related Downloads:
Firmware Downgrade Warning:
– It is strongly recommended that you do NOT downgrade the firmware.
– Downgrading the firmware from newer major firmware ECs to older major firmware ECs will result in the loss of applications, security features, and settings.
– Contact Lexmark Technical Support and see Knowledge Base article SO8017 for more information on the impacts of downgrade.
– Make sure the firmware you are downloading is the correct one for the product you have
Understand the firmware nomenclature:
From FW4, the firmware versions are named in the model ABCDD.xxy.zzz where:
– A indicates whether the printer is monochrome or color (M = mono, C = color)
– B indicates whether the printer is single function or multifunction (S = single function printer (SFP), X = multifunction printer (MFP))
– C indicates whether the user interface is a touchscreen, non-touchscreen, or a “lightweight feature set” (T = touchscreen, 4.3 inch or larger screen, N = non-touchscreen and non-lightweight, L = lite )
– DD informs the model family
– xx indicates the EC version of the main firmware, while y indicates the EC version of the minor firmware (050 = FW5.0, 051 = FW5.1, etc.)
– zzz indicates the version number in this EC firmware
– Firmware versions FW2 or FW3 are named in template DD.xxy.zzz using the same mapping as above. However, the DD model families used on FW2 and FW3 have been changed on FW4 and newer: ATL on FW2 and FW3 becomes AT on FW4 and newer, CB on FW2 and FW3 becomes AT on FW4 and newer, YK on FW2 and FW3 becomes PP FW4 and newer
– Make sure the firmware you are downloading is the correct one for the product you have
About the printer and scanner firmware:
Before you even consider installing this firmware, go to the device’s system information page and make sure that the version currently installed on it is not newer or does not match it. .
If you upgrade to this version, imaging devices may get print and scan quality improvements, new options added to the setup menu, feature enhancements, various fixes, as well as several other modifications that may improve stability.
Considering the large number of devices and manufacturers, as well as the wide variety of methods for upgrading imaging units, we recommend that you read the installation steps and initiate an update process for the imaging unit. firmware only when you are familiar with the procedure.
In addition to this, it would be best if you performed this task in a stable power environment such as that provided by a UPS unit. Also, make sure not to turn off the imaging device or use its buttons during installation, to avoid malfunction.
Therefore, if you intend to apply this version, click on the download button and install the package. Remember to check our website as often as possible so that you don’t miss any new releases.
It is strongly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help you if you have installed the wrong or incompatible driver. Problems can arise when your hardware device is too old or no longer supported.