Download ClockTuner for Ryzen (CTR) Download Free – v2.1 Beta 5

CTR (ClockTuner for Ryzen) software allows each user to customize the system with maximum energy efficiency. In this case, CTR is fully automated and does not limit the user’s actions. The program has a kind of artificial intelligence, which will help in any situation, and the protection system will monitor every step so that your components were not exposed to danger. CTR is compatible with all motherboards on the AM4 socket, despite the artificial limitations of AMD. As for conditions, there is one thing – the processor should be based on ZEN2 and now ZEN3 architecture. CTR is made by Guru3D’s oldtimer 1USMUS.

Read the original v1 guide before use on how to use and configure ClockTuner for Ryzen., seriously do it. We also have an updated guide based on v2.0 which you can read here. Our discussion forum on this topic can be found here.

What is new:

• PX PROFILES for all CPUs. Unlock maximum performance in low-threaded applications and games.
• Fast and accurate creation of P1, P2 and PX profiles during diagnostics (Zen 3 and Renoir only). The whole process takes about 7 minutes.
• Redesigned CTR HYBRID OC. Smooth, secure profile switching. Profile switching speed is up to 62 times per second (up to 4 times more than previous releases).
• Preloading profiles. Increases CTR response rate for loading changes.
• The efficient throttling system of the CTR HYBRID OC allows your CPU to handle an extra large workload efficiently (base frequency of 1.1 volts).
• Auto-recommendation of the lowest possible voltages for each profile. Allows maximum energy efficiency without performance degradation. In most cases, it is able to outperform PBO.
• Improved idle state.
• Read CPPC information via Advanced Configuration and Power Interface (ACPI).
• Improved security for communication CTR with the System Management Unit (SMU).
• CTR BOOST TESTER – whether you use CTR or Curve Optimizer (CO), you can compare the results of each core booster with advanced information (temperature, PPT, etc.).
• “CLEAR CONFIG & CLOSE” – button that allows you to reset all CTR settings to their default settings.
• Statistics for switching profiles in real time (PROFILES tab).
• Auto-recovery after sleep. Both for HYBRID OC and manual profiles.
• CALCUATE button for PX, P2 and P1. If you need to recalculate the profile, you do not need to start the whole diagnostic process again (Zen 3 and Renoir).
• Windows Hardware Error Architecture (WHEA) configuration process checker.
• Improved protection against dangerous and unintended user settings.
• Automatic recovery of configuration files after an error.
• Phoenix mode has been improved (fixed “PLATINUM trial” etc.).
• Independent profile system. If one profile breaks, the other profiles are safe.
• Improved support for unique dual CCD 5600X and 5800X processors.
• AGESA 1.2.0.1 and later are fully supported.
• TO DRAWER – individual button. The user can choose how the CTR should be minimized.
• Improved logging for all modes and functions.
• Rebalanced CPU quality categories (gold, silver and so on).
• CTR automatically adjusts “Hold Time”. No longer available to the user.
• Increased CTR start rate (up to 4 times).
• CTR has driver priority. Allows it to work more efficiently when the system is under maximum load.
• Reduced CTR’s CPU usage.
• Alt-Tab fix when CTR is in system tray.
• An easier way to activate profiles (no saving required).
• Numerous minor bug fixes.

Supported products:

• Zen 3: Ryzen 9 5950X, Ryzen 9 5900X, Ryzen 7 5800X and Ryzen 5 5600X
• Zen 2: Threadripper 3970X, Threadripper 3960X, Ryzen 9 3950X, Ryzen 9 3900X, Ryzen 9 3900XT, Ryzen 9 3900, Ryzen 7 3800XT, Ryzen 7 3800X, Ryzen 50X7, Ryzen 50X, Ryzen 5 3600, Ryzen 5 3500X, Ryzen 5 3500, Ryzen 3 3300X and Ryzen 3 3100
• APU: Ryzen 7 PRO 4750G, Ryzen 7 PRO 4650G and Ryzen 3 PRO 4350G

For correct work, CTR is required:

Installation:

• Download CTR and extract the ZIP archive in a directory of your choice
• Then download the Cinebench R20 archive and extract the contents of the archive to the “CB20” folder (this folder is inside the CTR folder).
• You can now run Cinebench R20 once. Please accept the license agreement and close it Cinebench R20. CTR is now ready for use.

The main principle of this software is to evaluate the quality of each CCX and adjust the frequencies individually. Prime95 with a number of special presets evaluates the stability of each CCX. A multi-rule step-by-step frequency algorithm allows you to choose the most stable frequency for all CCXs simultaneously without disturbing the energy balance between CCXs. CTR also cont ains a plug-in (optional) test package Cinebench R20 from Maxon, which will evaluate the results of the tuning.