Download Corsair Link Download Free – 4.9.9.3

It gives you an instant summary of how your system is performing, and you can monitor the temperature of your components and program Corsair Link to automatically adjust the cooling to meet your needs without opening the case. Corsair recommends migrating to Corsair iCUE.

There are five main panels in Corsair Link: System, Groups, Graph, Power (AXi or HXi only) and Options.

Important note: The latest version of Corsair Link is 4.9.9.3. However, many users have reported problems with the newer versions of this program. For this reason, we have Corsair Link 4.6.0.86 as the main download, which is the latest known version without any issues. You can scroll down for other versions on our server.

System panel

The system panel provides an overview of the components inside your computer, including any Corsair Link compatible hardware connected and also temperatures for most major components (CPU, graphics card and drives), CPU activity and graphics card fan speeds. The icons are moveable so you can drag and drop them around the image to simulate component placement in your building. The background images provided are of Corsair case products and can be changed to a custom image that reflects your system.

Fan control

By clicking on a fan in the Corsair Link System panel, you can select a number of pre-programmed modes as well as configure a custom fan speed curve that is assigned to activity in a predefined group. For example, front intake fans can be configured to increase speed depending on GPU temperatures, or exhaust fans can be set to spin faster if a thermal sensor inside the case reads too high a temperature.

RGB LED control

Corsair Link RGB LED strips attached to Corsair Link Mini or Lighting Nodes, H80i and H100i coolers, and Dominator Airflow Platinum can all have the RGB LEDs configured to any number of colors. You can also configure the lighting to change depending on a specific temperature defined by group, or just cycle colors. For example, if your CPU runs hot, you can set the lighting in the H80i to gradually change from blue to red.

Groups

The group panel allows you to assign fans and LEDs to different internal temperature readings. This provides the reference for temperature dependent fan curves or RGB LED settings.

Curve

The Graph tab allows you to select and graph temperatures and fan speeds monitored by Corsair Link in real time. You can select any of the temperature inputs or fans to draw.

Power

The Power tab appears in Corsair Link only if you have an AXi or HXi series power supply installed and connected to either an internal USB header, a Corsair Link Commander, an H80i/H100i, or a Commander Mini through the Corsair Link Digital connection. In this category you can monitor the power supply’s consumption, efficiency, load, temperature and fan speed. You can also enable or disable overcurrent protection and, in the AXi series, configure the cut-off points for that protection. You can also configure the fan speed to run 100% of the time by selecting a specific PWM % for the fan. The minimum is 40% and will be overridden by the PSU if the temperature inside the PSU gets too hot under higher loads or temperatures.

Alternatives

Several tabs in the Options panel allow you to configure Corsair Link, set up email alerts, update the firmware of selected Corsair Link hardware, and even log any number of variables monitored and/or controlled by the software.

What is new

• Full monochrome Vengeance DRAM support (including sync pulse) for Z170/Z270
• Full Vengeance RGB DRAM support for Z170/Z270
• X99 support for both items above (beta)
• DRAM timings displayed in the user interface
• DRAM part number shown for UI
• SP RGB fan support for Lighting Node PRO
• Fixed an issue with the H110i that could run the pump at a lower RPM until software boot
• Kabylake CPU support

Corsair Link 4.9.9.3 Changelog

• Fixes a .NET bug with certain languages
• Supports the original Commander device
• Support for multiple Commander MINIs fixed
• Fixed random UI crash when clicking different tabs repeatedly