Download Download Gigabyte Z590 AORUS MASTER (rev. 1.0) Intel Serial IO Driver 30.100.2129.8 for Windows 11 Free

Main features:

– Supports 11th and 10th Generation Intel Core series processors
– Dual Channel Non-ECC Unbuffered DDR4, 4 DIMMs
– Intel Optane memory ready
– 18+1 Phase Digital VRM Solution with 90A Smart Power Stage and Tantalum Polymer Capacitor Array
– Shield memory routing to avoid interference
– Advanced thermal solution with Fins-Array II, Direct Touch Heatpipe II and NanoCarbon Baseplate
– Onboard Intel WiFi 6E 802.11ax 2T2R and BT 5 with AORUS antenna
– 125dB SNR AMP-UP audio with high-end ESS SABER 9118 DAC, ALC1220 and WIMA audio capacitors
– AQUANTIA 10GbE BASE-T LAN with cFosSpeed
– Triple ultrafast NVMe PCIe 4.0/3.0 x4 M.2 with Thermal Guards II
– RGB FUSION 2.0 with multi-zone addressable LED light show design, supports addressable LED and RGB LED strips
– Smart Fan 6 with Multiple Temperature Sensors, Hybrid Fan Header with FAN STOP and Noise Detection
– Q-Flash Plus upgrades BIOS without installing CPU, memory and graphics card

This package contains the files needed to install the Intel Serial IO Driver. If installed, updating (over-installing) may fix problems, add new features, or extend existing features. We do not recommend using this release on platforms other than those specified, although other operating systems may also be compatible.

Install the driver via the installer:

– Copy and extract the Intel Serial IO driver onto the platform under test.
– Locate the “SetupSerialIO.exe” file.
-Right click on the executable file and select the “Run as administrator” option from the menu to start the installer, then click the “Yes” button on the “User Account Control” popup.
– You should see a welcome screen with component details. Click the “Next >” button to continue the installation.
– Next, you should see the License Agreement screen. Please review the license agreement and if you accept the license terms, select the “I accept the terms in the license agreement” checkbox and click the “Next >” button to continue the installation.
– Next, you can choose the folder location where the driver will be installed. By default, the driver will be installed in c:\program Files\Intel\Intel Serial IO. Click the “Next >” button to continue the installation.
– Next, a list of driver components that the installer will install will be displayed. Click the “Next >” button to continue.
– After a successful installation, you should see the setup complete screen. Click the “Finish” button to complete the installation.

Install the driver silently via the installer

– Copy and extract the Intel Serial IO driver onto the platform under test.
– Open a command prompt (cmd.exe) with administrator privileges (ie run as administrator). Click the Yes button on the User Account Control popup.
– Change directory to the directory where you extracted the driver in step 1, then change to the “Driver_Installer” directory.
– To see all available options for the installer, run the command “SetupSerialIO.exe -?”
– You should see a popup. For “-l” that specifies the language of the settings dialog ” option, the LCID list is shown in the table below. Click “OK” to continue.
– Run the command “SetupSerialIO.exe -b -s” to start the silent installation. (Where x indicates a specific version number.) This process takes approximately 1 minute to complete. After the silent installation is complete, the system will automatically reboot.
– After the system starts, you can refer to Section 0 to check the driver version.

Install manually via an INF file:

– Copy and extract the Intel Serial IO driver onto the platform under test.
– Locate the INF file. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
– Right click on the INF file and select the “Install” option from the menu to start the installation, then click the “Yes” button on the pop-up window.
– After installing all drivers, restart the system.

About the serial IO driver:

If you install this package, your device will be correctly recognized by compatible systems and may even benefit from new features or various bug fixes.

Please note that we do not recommend that you use any software on platforms other than those specified, even though other operating systems may also be compatible. Doing so may crash the installation and possibly render the device unusable.

When installing a package, the steps shouldn’t be too overwhelming, as every manufacturer tries to make them as simple as possible; usually, you have to check for compatibility, get the package, run the available setup, and follow the on-screen instructions.

However, due to the large number of devices and the variety of ways to apply these packages, it is best to consult the installation manual first to ensure a successful update.

That is, click the download button and apply the current software to your product. Also check our website frequently for the latest releases.