Download Download Intel M50CYP1UR212 Server System Configuration Detector Utility 6.03 for Linux for Linux Free

The Intel Configuration Detector for Linux is a script that collects the hardware and software configuration of an x86 system without installing additional software.

What it can detect using a bash script:

-System name, BIOS version, boot mode, BMC version, SDR version, system model, system manufacturer, number of DIMM slots, onboard components, network device ID, network interface, network Ethernet address, network IP address, network driver Program module, network driver version, network firmware version, network maximum transmission unit size, Omni-Path (embedded), Omni-Path device ID, Omni-Path driver, RAID driver, RAID volume, RAID device ID, SATA Controller, SATA controller mode, video device ID, video driver version
-Processor ID, number of cores, number of processor sockets, hyperthreading enabled, maximum speed, current speed, additional adapters (device ID and adapter series), network adapters
-Omni-Path, firmware, hardware and hardware version, status, physical status, link speed, connected cable, cable type (Cu or AOC), cable length, cable version, InfiniBand, adapter temperature, firmware, hardware and software version, PSID, status, physical status, link speed, link mode (InfiniBand or Ethernet), Intel and Broadcom RAID adapters
-Microsemi and Broadcom specific PCIe fan-out switches
-Video, GPGPU, additional peripherals, hard drive (SATA, SAS, SSD, NVMe) model, hard drive capacity, hard drive firmware, memory, vendor, serial number, model, size, location, configured speed, DIMM type (DDR3 , DDR4, etc…), volatile or persistent memory
-Operating system, manufacturer, operating system version, kernel version, others, operating system and hardware logs, OPA logs

Supported environment

-Red Hat / CentOS 6.x / 7.x / 8.x
-SuSE Linux Enterprise Server 12.x / 15.x

How to run Intel Configuration Detector for Linux?

1) Download Intel Configuration Detector for Linux from Download Center
2) Set the correct time/date on the system. This is used for unique file names.
3) Choose a location to run the script
4) Unzip the script file to the selected location. If you download and decompress the software package to a Windows USB key, and then copy it to a Linux system, you need to set the executable file permissions.
5) Sugen. Due to the type of information you collect, it will only run if you are a root user.
6) Open a terminal window in the selected file location.
7) Execute Intel Configuration Detector for Linux bash script. Some error messages may be displayed. Ignore the messages because they will not stop the script and will not be part of the discovery installation.
8) After the script is completed, the resulting tar file and its location in the tmp folder will be displayed.
9) Copy the tar file for you to record and/or attach it to the IPS.
10) In order to save file space, please make sure to delete the generated files

About the adjustment utility:

Install this adjustment utility, you will be able to manually configure various overclocking values, such as CPU and memory frequency, system clock, fan speed, and monitor the temperature of different components.

However, please note that you should only adjust these settings between the supported ranges; changing the configuration to extreme values ​​without an additional cooling system may severely damage the components.

The installation steps required to apply the software are very easy: get the downloadable software package, unzip it if necessary, run the available installer, and carefully follow all the instructions displayed to complete a complete and successful installation.

In addition, please note that it is recommended that you restart the system so that all changes take effect correctly. Please keep in mind that even though other operating systems may be compatible, we do not recommend that you install this version on platforms other than the highlighted operating system.

That is, click the download button to get the software package and set this function on the system. For more information on the latest version, please continue to visit our website to “keep up to date one minute ago”.