Download Download MikroTik RouterOS MIPSBE Firmware 7.5 RC 5 Testing for OS Independent Free

New in 7.5beta5:

– Health – Renamed the temperature reading information on the CRS518-16XS-2XQ from “CPU” to “Switch”;
– l3hw – fixed hardware offload NAT;
– ppp – improved service stability under high load;
– ppp – if the “routing” parameter is not specified, use /32 as the default netmask;
– sfp – fixed “eeprom” reading on single SFP port ARM devices;
– sfp – fixed unresponsive “sfp1” interface after disabling “ether1” on NetMetal devices;
– swos – Enable SwitchOS support for CRS310-1G-5S-4S+;
– bgp – fixed remote deny feature option, max prefix limit bug and admin stop;
– capsman – added random range option for “reselect-interval” parameter (CLI only);
– Containers – added tun/tap support for containers;
– Container – Fixed handling of mount directories;
– Containers – Fixed imported tar image path log messages;
– defconf – fixed loading default config on RB4011 with WifiWave2 package enabled;
– dhcpv6-client – moved invalid lifecycle log messages from “debug” to “error” topic;
– dhcpv6-relay – fixed relay forwarding (introduced in v7.1.5);
– dhcpv6-server – improved stability when getting bindings;
– dns – added “match subdomains” option for static entries (CLI only);
– Firewall – Added support for RTSP helper;
– lora – don’t ignore the minus sign for spoofed GPS coordinates;
– lte – Added “SIM not inserted” and “SIM failure” messages to AT modem “status” and “monitor” commands;
– lte – Added chat and NMEA port support for Simcom modem, USB combo (Device ID – 0x9003);
– lte – added chat support for Simcom modem, USB combo (device ID – 0x9005);
– lte – Changed cell ID information display to short format for 3G connections;
– lte – Fixed the existence of LTE interface of Telit LN940;
– lte – improved antenna scanning for Chateau devices with switchable antennas;
– lte – improved configuration export when there are multiple LTE interfaces;
– lte – modem dialer, if the modem replies with an error to the initial string set by the user, the dialing sequence is not reset;
– netinstall – fixed Netinstall program for ARM devices;
– netwatch – probe to automatically start migrations from previous RouterOS versions;
– netwatch – changed ICMP default packet loss failure threshold to 85%;
– ospf – improved stability when interfaces are disabled during database swap;
– ovpn – fixed encryption key update process causing periodic session disconnection;
– ovpn – improved system stability when using hardware acceleration on ARM64 devices;
– ovpn – moved disconnected user log messages from “Debug” to “https://drivers.softpedia.com/get/Router-Switch-Access-Point/MikroTik/info” topic;
– Ports – Added support for D-Link DWM-222 in Serial/PPP mode (Device ID – 0xac01/0x7e3d);
– port – added support for Huawei/ZTE K5006z in serial/PPP mode (device id – 0x1017/0x1018);
– ptp – improved system stability on CRS devices;
– Quick Settings – PPTP and SSTP server additions with “VPN” checkbox removed;
– route filter – fixed “delete bgp-communities” command;
– sfp – fixed disabling QSFP+ and QSFP28 interfaces when using breakout cables;
– snmp – fix VRF usage after system boot;
– socks – fix “dst-port” usage when checking access lists;
– ssh – fixed import of public keys;
– ssh – fixed a small typo when importing public keys;
– sstp – fixed client stuck in “random number matching” state;
– switches – fixed ACL rules for switches with more than 28 ports in 98DXxxxx (introduced in v7.3);
– traceroute – added “do-not-fragment” parameter support (CLI only);
– traceroute – increased packet size limit to 65535;
– webfig – fixed the display of grahs in the status page;
– webfig – fixed negative values ​​of floating point fields in -0. Format;
– wifiwave2 – Added “sae-pwe” parameter with hash-to-element mechanism for SAE PWE derivation;
– wifiwave2 – added support for 802.11k;
– wifiwave2 – fixed the display of AKM in scan results;
– wifiwave2 – fixed duplicate AKM in RSN messages;
– wifiwave2 – fixed incorrect AKM usage for FT-WPA3-EAP-192;
– wifiwave2 – fixed reassociation response sending for fast transition via DS;
– wifiwave2 – fixed setting of “ft-nas-identifier” parameter;
– winbox – do not show previously connected LTE interfaces when establishing an LTE connection;
– winbox – fixed “enable”, “disable” and “comment” functions for L2TP-ether type interfaces;
– winbox – fixed “Next run” parameter display under “System/Scheduler” menu;
– winbox – fixed the “Type” and “Value” fields displayed under the “System/Health” submenu;
– winbox – display warning messages for BGP connection entries;
– x86 – fixed advertisement for 2500M and 5000M link speed on ixgbe driver;

About router firmware:

Before considering downloading this firmware, go to your router’s system information page and make sure the currently installed version is not a newer version or matches this one.

Due to the wide variety of router models and different methods of device upgrades, it is highly recommended that you read and most importantly understand the installation steps before applying new firmware, even if you are an advanced user.

In theory, these steps shouldn’t be a hassle for anyone, as manufacturers try to make them as simple as possible, even if they don’t always work out. Basically, you have to upload the new firmware to the router via its management page and allow it to upgrade.

If you install the new version, you can expect a higher level of security, different bug fixes, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, and several other changes.

If you’re looking for some safety precautions, keep in mind that it’s best to use an ethernet cable rather than a wireless connection to perform uploads, as wireless connections can easily be interrupted. Also, if you want to avoid any glitches, make sure you don’t turn off the router or use its buttons during installation.