Download Download Peplink Pepwave MAX 700 HW1 Router Firmware 8.1.3 for OS Independent Free

Improve:

—— [B20] New: Support MAX adapter
Compatible balance: 20/30

—— [AP Controller / 11ac] New: When the Wi-Fi client connects/disconnects to the AP, the client’s name will be displayed in the event log.
Compatible balance: all
Compatible with MAX: BR1 MK2, 700, HD2/4, Transit
Compatible with MediaFast: all
Compatible with X series: EPX, SDX Pro, SDX, 580X, 380X, PDX, MBX, 20X
Compatible with surfing SOHO: SOHO MK3

—— [DPI] Update: 269 protocols can now be identified in “Active Sessions” and “DPI Report” on InControl 2
—— [BGP] Supplement: BGP over GRE
Compatible with all models

—— [Cellular & LTE-US] Added support for AT&T 3G Sunset
Compatible with models with integrated LTE-US Cellular

—— [FusionHub] New: BGP/OSPF/RIP2 support
Compatible with usionHub

Issues resolved:

—— [FusionHub] Fixed: After enabling Web content filtering, the system CPU load will become unnecessarily high and will consume additional downlink traffic.
—— [FusionHub] Repair: Abnormal CPU load
Compatible with FusionHub

—— [Jumbo Frame & Link Aggregation] Fix: If “Jumbo Frame” and “Link Aggregation” on the LAN are enabled, “HA Configuration Synchronization” will not work
Compatible balance: 305, 380 or above

—— [System] Repair: Potential system instability problem
—— [System] Fix: Unable to apply a large number of geo-location firewall rules
Compatible with all models

—— [EPX] Fixed: If the device has more than 10 cellular WANs, the cellular WAN will display “Unknown Physical Status”
Compatible with X series: EPX

—— [B310 5G] Fix: Cannot display LAN port status
Compatible balance: 310 5G/fiber 5G

—— [5G] Fixed: Cellular WAN configured to connect with “LTE only” connects in 5G mode
Compatible balance: 310 5G/fiber 5G
Compatible with X series: EPX, MBX, SDX Pro, SDX, 310X

—— [AP Controller] Fix: The AP> Mesh / WDS page does not respond
Compatible balance: all
Compatible with MAX: 700, HD2/4, Transit
Compatible with MediaFast: all
Compatible with X series: EPX, SDX Pro, SDX, 580X, 380X, PDX, MBX

—— [B20X] Repair: system instability caused by memory processing
—— [B20X] Fixed: Wi-Fi clients may not be able to connect to 2.4 GHz Wi-Fi radio
Compatible with X series: 20X

—— [Wi-Fi] Fix: Wi-Fi FragAttack vulnerability
Compatible balance: 30 Pro, one
Compatible with MAX: all (except: BR1 ENT, HD2 Mini, HD1/2 Dome)
Compatible with MediaFast: HD2/4
Compatible with X series: PDX, MBX, 20X
Compatible with UBR: UBR LTE
Compatible with Surfing SOHO

—— [PrimeCare] Fix: PrimeCare expired processing failure
Compatible with device product codes with the suffix “-PRM”

—— [SOHO MK3] Fixed: Wi-Fi clients may not be able to connect to 2.4 GHz Wi-Fi radio
Compatible with surfing SOHO: SOHO MK3

—— [BR1 Mini] Correction: WAN does not work as a LAN function
Compatible with MAX: BR1 Mini/Mini Core

—— [310 Fiber 5G | Transit] Fix: “Wi-Fi” LED blinks when Wi-Fi AP is turned off
Compatible balance: 310 fiber 5G
Compatible with MAX: Transit

—— [Cellular] Fixed: If the “Manual Carrier Selection/PLMN List” setting is configured, the cellular radio may not be able to connect
Compatible balance: 30 LTE/Pro, 310
Compatible with 5G/fiber 5G
Compatible with MAX: BR1/2, HD2/4, Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: HD2/HD4
Compatible with X series: all

About router firmware:

Before you consider downloading this firmware, please go to the router’s system information page and make sure that the currently installed version is not updated or does not match this version.

Due to the wide variety of router models and different methods of upgrading devices, it is strongly recommended that you read and understand the installation steps before applying the new firmware, even if you are an advanced user.

In theory, these steps shouldn’t be too troublesome for anyone, because manufacturers try to make them as simple as possible, even if they are not always successful. Basically, you must upload the new firmware to the router through its management page and allow it to be upgraded.

If you install a new version, you can expect a higher security level, solve different vulnerabilities, improve overall performance and transmission speed, enhance compatibility with other devices, increase support for newly developed technologies, and other changes.

If you are looking for some security measures, remember that it is better to use an Ethernet cable instead of a wireless connection to perform the upload, as the wireless connection can easily be interrupted. In addition, if you wish to avoid any malfunctions, please make sure not to power off the router or use its buttons during the installation process.

If this firmware meets your current needs, please obtain the required version and apply it to your router unit; if not, please visit our website as often as possible to avoid missing updates that can improve your equipment.