Download Intel HNS2600BPS24 Compute Module OFU Utility 14.1.29 Free

Changelist:

– Support CCB3708 – [Intel server boards based on the 1st or 2nd Gen Intel Xeon Scalable processors families] [Utilities] Updated syscfg and flashupdt for security.
– fix 16015351886 – [Utilities] [flashupdt] [Agnostic] Set the path of flashupdt to /usr/bin/.

Windows installation:

1. Copy the OFU compressed package to a local folder.
2. Unzip to a local folder (for example: .flashupdt). Go to the flashupdt folder (cd Flashupdt).
3. Go to the “Win_x86Drivers” or “Win_x64Drivers” folder (depending on the operating system).
4. Run “install.cmd” as an administrator to install the driver.
5. Go to the “Win_x86” or “Win_x64” folder to execute the flashupdt utility (depending on the operating system). Run flashupdt.exe as administrator.
6. To test, run the command with options (eg “flashupdt -i”).
7. For HTTP and FTP based updates, download curl.exe from https://curl.haxx.se/download.html and copy to the same folder that contains flashupdt.exe.

Linux RPM installation:

1. Copy the flashupdt rpm package from the corresponding folder to the local folder.
-> For RHEL prior to 8.0, copy from Linux_x64RHEL
-> For RHEL 8.0 and above, copy from Linux_x64RHELRHEL8
-> For SLES older than 15, copy from Linux_x64SLES
-> For SLES 15 and above, copy from Linux_x64SLESSLES15
2. Remove all previous versions of the utility.
3. Install the flashupdt utility using “rpm -ivh flashupdtxx.rpm”. This will install the utility in “/usr/bin/flashupdt/”.
4. On RHEL/SLES, after installing the rpm, close the terminal where the rpm was installed, and execute THE utility from a new terminal (for example, “# flashupdt -u /tmp/flashupdt.cfg”).
5. For HTTP and FTP based updates, execute the utility from “/usr/bin/flashupdt/” as the “chaff2l.sh” file is required for such updates.

Linux regular installation:

1. Copy the OFU tarball (for RHEL or SLES) to a local folder.
2. Unzip to a local folder (for example: .flashupdt). Go to the flashupdt folder (cd flashupdt).
3. Change file permissions by running # chmod 755 install.sh and # chmod 755 flashupdt
4. Install the utility using the command “#./install.sh”
5. Change to the RHEL or SLES directory (based on the operating system). To run this utility on RHEL 8, go to the RHEL/RHEL8 directory and run # chmod 755 chaff2l.sh.
7. Unzip the file flashupdt.zip to obtain the flashupdt executable for the Linux operating system.
8. To test the installation, run the command with options (for example: #./flashupdt -i).

Linux DEB installation:

1. dpkg -i xxxx.deb

About tuning utilities:

Installing this tuning utility, you will be able to manually configure various overclocking values ​​such as CPU and memory frequency, system clock, fan speed and monitor the temperature of different components.

Note, however, that you should only adjust these settings within the supported range; changing the configuration to extreme values ​​without additional cooling can severely damage components.

The installation steps required to apply the software are very simple: obtain the downloadable package, extract it if necessary, run the available installer, and follow all displayed instructions carefully for a complete and successful installation.

Other than that, please note that it is recommended that you perform a system restart for all changes to take effect properly. Keep in mind that we do not recommend installing this build on platforms other than those highlighted, even though other operating systems may be compatible.

That said, click the download button, grab the package and set this up on your system. For more information on the latest releases, keep checking our website to “Stay Up to the Minute.”