Download Tixati 3.18 Download | TechSpot

Unlike many other torrent clients, we take pride in saying NO to spyware and adware. Tixati installs and uninstalls cleanly and doesn’t add anything extra to your system. Our software is fully self-contained and doesn’t have annoying dependencies on Java or .Net frameworks.

Tixati is a peer-to-peer file sharing program that uses the popular BitTorrent protocol. This protocol allows many peers to form a cooperative swarm and download very large files with great efficiency.

To start a download, you must first find a .torrent file. These files are very small, and contain meta-data describing a much larger file to be downloaded from other peers. There are millions of these .torrent files available on the internet, and on this page we will show you some easy ways to find them.

Once you’ve obtained a .torrent file, you can easily open it within the Tixati software by clicking the ‘Add’ button. After the .torrent file is opened, Tixati connects to other peers and starts downloading the file automatically. The downloaded files are left in a convenient ‘Downloads’ folder on your desktop.

Features

• Simple and easy to use
• Ultra-fast downloading algorithms
• DHT, PEX, and Magnet Link support
• Easy and quick install – no java, no .net
• Super-efficient peer selection and choking
• RC4 connection encryption for added security
• Detailed bandwidth management and charting
• UDP Peer Connections and NAT router hole-punching
• Advanced features such as RSS, IP Filtering, Event Scheduler
• No Spyware
• No Ads

What’s New

Tixati version 3.18 is now available. This is a major update with several important improvements:

• Linux version GUI fully updated to GTK3
• completely new tree/list view for all Windows and Linux builds, no longer depending on OS common controls
• refined initial scanning procedures to better handle seed files with a different length than expected
• fixed waiting problems with local file scanning on program startup
• added workaround to load malformed v1+2 torrents that have zero-length files misplaced around padding files
• new customizable Piece Creation Limiter in Settings > Transfers > Files to help avoid excess RAM buffering with slow hard drives
• new charts showing total pieces in memory and pending save in Help > Diagnostics > Pieces Monitor
• fixed problem loading v2 .torrent files that have nested subdirectories named “info”
• fixed web seed queuing problems that would cause excessive waiting after HTTP redirect
• new file ordered priority options to keep existing order while inserting / appending additional files
• fixed problems with Trackers column in main transfers view, will now match presets even with non-standard line spacing
• increased limit on number of trackers that can be set in a torrent, from 128 to 300
• fixed problems with default font fallback on rich text views
• fixed rich text view selection rendering problems when backscroll is trimmed for logs and chat rooms
• fixed rich text view problems when new lines are added during drag-select operation
• flags in tree/list views now display at correct height-based sizing instead of width-based
• fixed problems updating toolbar styles after change in Settings > UI > Widget Styles
• excessively long tooltips are now properly truncated and ellipsized to avoid flickering problems
• several other minor visual fixes in the GUI
• updated IP location tables

Tixati 3.17 Changelog

Tixati version 3.17 is now available. This release contains several important updates:

• added workarounds for torrents that contain inconsistent padding structures
• reduced RAM usage when there is a backlog of local download pieces waiting to save due to a slow storage device
• download piece creation is now limited if over 18 pieces in same torrent are pending save to disk
• download piece creation is limited if over 100 pieces total in all torrents are pending save to disk
• fixed problems with right-click tray menu positioning on Windows builds
• when using OS Defaults color scheme, rich-text views now show expected background
• pasting multiline text into chat on Linux/GTK builds is now formatted correctly
• fixed character spacing problems when rendering bold text in tree/list views on Windows builds
• fixed problems copying text from a chat room, usernames are now encoded correctly and displayed without hash string
• the HTTPS layer that powers the WebUI has had several minor fixes to prevent premature connection abort when transfering larger files
• added gzip/deflate/brotli response compression to WebUI connections
• shortcut Ctrl-V now works in more places in the program to paste magnets links, and will now automatically flip to transfers view
• better handling of low-memory conditions and out-of-memory process abort
• updated IP location tables
• other minor visual fixes in the GUI

A major update to the framework is in progress. This will include a new tree/list view control to replace the less-reliable common controls used in Windows builds. On Linux builds, a transition from GTK2 to GTK3 is underway and testing will begin soon.

Previous release notes:

New BitTorrent v2 Support

A full BEP-52 implementation has been added to the program. …The primary benefit of this is the use of the block-level SHA-2 hash function instead of SHA-1 at the piece level. …However, there are also many other changes from the v1 protocol that required a major review and re-write of the torrent/peers/trackers/pieces core logic. …Combined version 1+2 torrents are also fully supported.

Trackers

All tracker function has been completely replaced with a newly-written implementation. …Dual-protocol and dual-interface announcement is now fully supported for each individual tracker.

A tracker presets feature has been added, which can be accessed from Settings > Transfers > Trackers. …These presets can be set by simply right-clicking any transfer in the main window and using the Trackers sub-menu. …They are also accessible from the standard tracker-edit dialog, the transfer preload window, and the new seed creation dialog.

A default preset for newly-loaded transfers can also be selected in the settings window. …This will be set into non-private transfers, upon loading, before applying the Individual Tracker Options.

Peer Connections

The peer connection logic has been largely re-written with major improvements in several areas. This was needed to accommodate the new v2 protocol messaging requirements, in particular the piece selection algorithms and file hash field synchronizing with other peers. …The new implementation takes full advantage of the fact that when a transfer is only downloading a subset of files, the new v2 protocol allows clients to only download hash data for files that are needed. …If managed correctly, this saves bandwidth, time, and memory, especially for extremely large torrents when only a few files are needed.

It was also necessary in hybrid swarms to allow dual connections so peers can communicate over v1 and v2 simultaneously. …This is sometimes required for situations where there are many v1-only clients in a swarm and v2 hash-info is not fully available, which, when following the specification as-written, prevents pieces from being available over the v2 connection.

The peer connection selection and management algorithms have been completely replaced with much more modern versions that can efficiently handle multiple ports connected from the same IP, perform regular peer-ID duplicate detection, and prioritize connections based on their protocol and piece availability. …Unusual situations such as losing pieces, or going from complete state to incomplete state, are now handled with great precision. …The process for gathering meta-info from peers has also been greatly improved and is much faster when dealing with extremely large torrents.

Web Seeding

Support for web seeds has been completely overhauled. …Peak speeds are much higher and far less CPU usage is needed to maintain a continuous flow of data.

For better control over web seed connections, a brand-new Web Seed Request Limiter has also been created. …This is available from Settings > Transfers > Peers. …Simultaneous connections can be globally limited based on host name, and other rate-limiting/throttling parameters can also be set. …Rules can be customized for different hosts.

DHT

To provide peers to dual-protocol torrents, it was necessary to modify the DHT engine to schedule separate search/announce procedures for each protocol ID-hash that a particular torrent requires. …A major review and update of the DHT code was done to support this and also to add several other DHT protocol updates. …These updates were made in order to support upcoming Tixati features like mutable torrent support.

New Seed Creator

The seed creator (third tab in the Add window) has been completely replaced. …The new dialog allows flexible creation using files from different parts of the local file system, and will also let the user change the virtual-name of files and folders. …This enables you to fully customize the file structure in the torrent meta-info without needing that same structure replicated on the local file system.

There are also numerous new options to select tracker presets, protocol and padding options, piece sizes, comments, and other technical parameters. …A full host of default options can be changed from the settings menu, including full control over the default piece size selection algorithm.

You can also now drag-drop files and folders from the operating system directly into the transfers view to create new seeds. …When the Categories feature is enabled, you can drag-drop directly onto a category, or into the main view when a category is selected, and the new seed will be created in that category.

File and Piece Handling

All file handling logic has been revised. …The file-checker has an improved combined SHA-1 and SHA-2 multi-threaded piece reading and hashing pipeline, which will thoroughly cross-check all incoming and existing data in hybrid v1+2 torrents. …Checking speed has also improved on multi-CPU systems.

For v2 torrents, all incoming 16K blocks are checked immediately upon download instead of waiting for full pieces, so malicious peers are eliminated from the swarm much quicker.

New Tracker Options for Categories

In the category properties and add windows, there is a new Trackers tab. …This contains an option to set a tracker preset on any transfer entering the category. …These options are also reflected on the category right-click menu.

There were also several minor fixes to the category system. …The right-click options for a category separator now correctly control all categories following. …The Share sub-menu on categories has been fixed to show the checkbox states for channel mirroring correctly.

Several Channel GUI Fixes

The recently re-written color text controls that power the chat rooms and user browse window have undergone a few more changes to perfect the way scrolling and back-buffering work. …There were also other optimizations and adjustments to the background word-wrap updating routines and timing to further minimize CPU usage after a window full of text is resized.

In addition, we fixed some minor problems with the channel restrictions window updating after rule changes, and also some word-wrap anomalies when switching between chat rooms.

New Columns

Transfers have two new optional columns, available from the Layout button menu in the main transfers view. …The Protocol column will show v1, v1+2, or v2. …The Trackers column will show the name of the current preset. …If there is no matching preset, either a hash identifier of the set (to be able to identify matching transfers) or in the case of only having one tracker, the tracker URL itself. …The tooltip in this column will always show the full set of tracker URLs.

Peers also have a new optional Protocol column. …This shows either v1 or v2 for regular peers, or HTTP or HTTPS for web seed peers.

Many Other GUI Improvements

A new find-bar has been created for the Files tab in the main transfers view, and also the preload window. …Press CTRL-F when the view is in focus to make the find-bar appear at the top. …You can also use the F3/shift-F3 keys to step through matches.

When new transfers are loaded, they are now selected and scrolled into view, including changing selected category if need be. …This works for any manually-created transfers, including pasting in magnet links via CTRL-V, drag-dropping .torrent or .magnet files, or creating new seeds.

There have been dozens of other minor tweaks and improvements to the GUI, and several optimizations to reduce interface CPU usage on both GTK and Windows builds.

Several Other Core Fixes

During the course of development of this version, there have been countless other minor fixes and refinements made as problems were discovered. …Many opportunities for optimization were explored, and much testing was done. …We also analyzed all outstanding automated crash reports and applied several minor fixes. …This is the smoothest running Tixati that we have ever produced.

More To Come

We are working on several other major improvements to the transfers and channels systems, including file merging, channel feeds, and more protocols.

Thanks for using Tixati!