Download Download Panasonic WV-S6130 Network Camera Firmware 4.20 for OS Independent Free

Changes/Fixes:

– Improved accuracy of privacy mask location.
– In FTP/SNMP authentication, authentication failure exceeding certain conditions will record “Authentication Error” in the system log.
– Support EasyIpSetup software (Ver4.31R00), which can display the device serial number
– Updated (enhanced) SNMP MIB information
– After improvement, Hikvision video recorders can be connected through CGI commands.
– Improved pan/tilt operability when connected to VMS (Video Management Software).
– Upgrading the firmware by sending specific CGI commands for camera operation in a VMS (Video Management Software) environment fails. Can’t operate pan/tilt either.
– When changing the image capture mode, recording may not stop.
– “Auto Tracking” that returns automatically after losing an object does not work when Auto Tracking’s Lost Object Search = “OFF”.
– VMD alarms may not be detected even across the line at the bottom of the screen.
– By using ONVIF’s ContinuousMove command for PTZ operations, each zoom operation temporarily stops zooming.
– The slider of VMD may not be able to slide. In Internet Explorer Compatibility View mode.
– When the shutter slows down at night, etc., the stop position of the patrol may change.
– The camera may restart due to a memory access error. (Frequency of occurrence: rare)
– Fixed Auto Track Standby display showing as Operation Mode Display: On. (“Auto Track Waiting” —> “Auto Track Waiting”)
– The camera may not be able to upgrade firmware, in a VMS (Video Management Software) connection environment (sending specific CGI commands for camera control), and pan/tilt operations etc. cannot be performed. Upgrade the camera a second time with the file for firmware version 4.20 (or later).

Update the camera’s firmware

– Download the latest firmware file and save it on your PC.
– click [Maintenance] Label.
– on the lower left side of the screen [Maintenance]click [Update Firmware].
– click [Update Firmware]. The camera will restart automatically.
– After the camera restarts, a dialog box will prompt you to select a firmware file.
– click [Browse…]. A dialog box prompts you to specify the location of the firmware file.
– Select the firmware file you downloaded from the Panasonic IP camera website, and click [Open]. Displays the selected file name.
– Confirm the file name, and click [Update Firmware].
– This [Updating firmware.] screen is displayed, then [Restarting now…] display screen.
– After the firmware update is complete, the camera homepage will be displayed.
– You can confirm the firmware version of the camera on the top page.
– Confirm the new firmware version of the camera on the top page.
– Do not turn off the power during firmware update.
– When updating the firmware, all images buffered in memory will be deleted.
– Delete all alarm logs when updating firmware.
– You can also update the camera’s firmware using the installer.
– The current firmware version of the camera can be found at [Top] page and [Status] Page.
– Updating the firmware may take ten minutes or more depending on network conditions.

About IP camera firmware update:

Updating to a firmware version newer than the one already installed on the IP camera can improve the overall performance and stability of the device, resolve various issues, and add support for newly developed features or enhance existing features.

Downgrading camera firmware, on the other hand, restores its functionality in the unlikely event that the currently installed version fails or the device degrades after an upgrade. However, keep in mind that it may not always be possible to apply an earlier version.

Changing your camera’s firmware is necessary when a new version fixes a problem you’re having with your device or adds new features (or enhances existing features) that might be useful to you.

As for the installation method, the steps vary depending on the model you have, but basically, you have to connect your camera via an ethernet cable (username and password required) and upgrade your unit using the downloadable file in the firmware update section. Make sure you did not interrupt the installation process.

However, be sure to read and understand the installation steps carefully to avoid damage to your equipment. This process is not intended to be disruptive, but it is a good idea to save all configurations before applying a different firmware.

That said, if you think this firmware improves your device in any way, hit the download button and get the version you want; if not, check our website as often as possible so you don’t miss out on updates that improve your camera’s performance.