Download Buffalo TS1400D NAS Firmware 1.68 Free

Bug fixes:

– [SMB] Modified to patch the vulnerability (CVE-2020-25717).

warn:

– If you experience any issues caused by this firmware update, please consult your local technical support representative.
– Do not turn off the device until the update is complete. This will take a few minutes. You will receive a message when the update is complete.
– The USB drive is not automatically mounted after a firmware update. To install them, unplug them and reconnect them.

How to use the updater:

1. Connect the TeraStation properly and configure the TeraStation and computer to run the updater on the same network subnet. The subnet mask should be the same, and the first three numbers of the IP address should be the same. The last digit of the IP address should be different.
For example, if the computer’s IP address and subnet mask are

” 192.168.0.10 , 255.255.255.0 “
The TeraStation’s IP address and subnet mask are
” 192.168.1.150 , 255.255.255.0 “
Then the updater will _not_ work properly.
In this case, reconfigure the TeraStation’s IP address and subnet mask to
” 192.168.0.150 , 255.255.255.0 “.
Then they will be on the same subnet and the updater will work fine.
2. Close all applications. Also, stop or quit any firewall software.
3. Unzip the downloaded file and run “TSUpdater.exe”. When the TeraStation is detected, an update window will open.
4. If multiple TeraStations are connected, select the TeraStation to update.
5. Click Update and enter the TeraStation’s administrator password.
6. Click OK.
7. The firmware transfer and update will begin. Wait until it finishes. The Information LED will flash during the update.
8. When the update is complete, a message will be displayed.

Regarding NAS updates:

Upgrading Network Attached Storage (NAS) firmware can improve overall system performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new features), or updating different applications.

With so many NAS manufacturers and so many types of network storage, installing new firmware may not always be as easy and less secure as it seems. Failure to perform a software update can cause critical failure of the NAS.

Therefore, before you consider applying this release, please read the installation guide carefully and start the process only after you understand and are fully familiar with all the steps.

Also, it is a good idea to consider using a UPS unit (Uninterruptible Power Supply) for this task as no power interruption will affect the upgrade.

With all these aspects in mind, after you read the installation guide, click the download button to apply this firmware version to your NAS. Remember to check our website for the latest version.