Download Download Allen & Heath dLive CDM32 Digital Mixer Firmware 1.91 for OS Independent Free

Improve:

-The IP controller in Director is now forbidden to persist across sessions, and has separate control for MixRack and Surface IP controllers.
-Improved director graphics performance on Windows computers.
-Support the latest DX164-W and DX32 hardware after component changes

repair:

-Fixed RTA average control behavior.
-Calling a program with gain sharing and redundant gigaACE connection enabled may cause gain sharing to stop working on some channels.
-Handle GX/DX intermittent connection failures more gracefully.
-Solve the problem that NEQ12 ignores the width control in some cases.
-Opto soft spin controls are now reliably linked to the main compressor page controls.
-Fixed the bug that the RTA control could not be updated correctly after the scene was recalled.

Known issues:

-When the DX box is configured to be “connected” offline, Director can display the offline configuration when connected to MixRack.
-It is not supported to connect the ME personal mixing system to the DX2 socket on the GX4816.
-Reset the PAFL delay after the mixer configuration is changed.
-The controller needs to be restarted to connect to the IP controller when it was previously online and then offline.

To update the firmware with Surface connected:

1. Download the latest firmware and save the .zip file.
2. Remove any previous dLive firmware from your USB drive. To do this, check the USB AllenHeath-dLive folder and delete the existing firmware folder and Firmware.md5 file. Do not delete other files or folders.
3. Unzip the .zip file to the root directory of the USB drive. Do not change the folder name or browse the firmware folder, because doing so may damage the firmware. Attempting to navigate or open files in this directory may cause your operating system to leave small temporary system files, which will invalidate your firmware.
4. Safely remove the USB drive from your computer.
5. Connect dLive Surface to dLive MixRack via gigaACE or network. To do this, insert a Cat5 cable between one of the Surface gigaACE/network ports and one of the MixRack gigaACE/network ports.
6. Insert the USB drive into the dLive USB port, and then touch Update on the firmware page. dLive will restart to the “Boot Loader” screen, and if a valid firmware is found on the USB drive, it will display the current version and version details found on the drive.
7. Tap the update button. Don’t interrupt this process. Failure to complete the transfer may result in damage to the firmware. Ensure that the main power supply and connection cables are reliable, and that the system will not be disturbed or shut down during the update process.
8. After the firmware is successfully installed, the system will automatically restart.
9. After the system is fully booted, call the template performance or user performance to restore your settings.

To update the firmware when the Surface is not connected:

1. Download the latest firmware and save the .zip file.
2. Remove any previous dLive firmware from your hard drive. To do this, find the AllenHeath-dLive folder and delete the existing firmware folder and Firmware.md5 file. Do not delete other files or folders.
3. Unzip the .zip file to a directory on the hard drive. Do not change the folder name or browse the firmware folder, because doing so may damage the firmware. Attempting to navigate or open files in this directory may cause your operating system to leave small temporary system files, which will invalidate your firmware.
4. Open the web browser and enter the IP address of MixRack in the address bar (default: 192.168.1.70)
5. Choose Choose File
6. Select the location to unzip the firmware and navigate to: AllenHeath-dLiveFirmwareTLD-MixRackFirmware
7. Select Firmware.tar.xz and press Open
8. Choose Update
9. Wait for MixRack to update. Don’t interrupt this process. Failure to complete the transfer may result in damage to the firmware. Ensure that the main power supply and connection cables are reliable, and that the system will not be disturbed or shut down during the update process.
10. After the firmware is successfully installed, MixRack will automatically restart.
11. After MixRack restarts, the browser window will display the new firmware version
12. Call template performance or user performance to restore your settings.

About DJ mixer update:

Updating the firmware version of the mixer can add support for newly developed features (or improve existing features), enhance audio quality and transition effects, solve different problems, such as various noises heard in some cases, and many others Related improvements.

However, before downloading this package, please go to the system information of the device and make sure that the currently installed firmware is not newer or matching this version. In addition, you should be aware that a failed update may severely damage the software of the mixer, so it is important to be familiar with the installation steps.

As for applying this version, you must transfer the downloadable package (or its contents) to the mixer through any available method, and start the device through various key combinations to enter the update mode (make sure you read the product’s user guide).

That said, if you are considering installing this version and you are confident that you have all the knowledge needed to successfully upgrade, please download the package and apply it to your mixer. Check our website frequently so you don’t miss any updates that can improve your device.