Download Download FUJINON GF250mmF4 R LM OIS WR Lens Firmware 1.20 for OS Independent Free

Variety:

– Optimized aperture control parameters to improve exposure tracking during movie shooting.
– The noise variation of the focus motor during movie shooting has been stabilized.

Precautions:

– If the firmware update fails, the camera may not function properly in some cases. Carefully read the notes provided here.
– Always use a fully charged battery when updating the firmware as a basic method. Never turn off the camera or attempt to use any camera controls while the firmware is overwritten.
– You can directly update the firmware from an older version to the latest version.
– The firmware update takes approximately 60 seconds.
– After the firmware is updated, some old version data cannot be restored.
– If you encounter any problems, please check here.

Firmware updater:

– Turn on the camera.
– Press the “MENU/OK” button and select “Format” in the “Settings” menu.
– Press the selector button (up) to select “OK”, then press the “MENU/OK” button.
– Then, the format will start.
– Turn off the camera after formatting is complete.
– Insert the formatted memory card into the card reader slot of the PC.
– Download the firmware and copy it to the card.
– After copying is complete, remove the card from the card reader slot and place it in the camera.
– Press the “DISP/BACK” button to turn on the camera to show the display on the right.Then, press the “MENU/OK” button
– Select item to enter [LENS] Updated XF lenses.
– according to [OK] button to go to the next step.
– according to [UP button] Select OK.
– according to [OK] button and wait.
– The firmware update has been successfully completed.
– turn off the camera
– Check for upgraded firmware.
– Format the card.

Regarding lens updates:

Upgrading or downgrading a lens to a different firmware version may improve the overall performance and stability of the device, as well as improve certain features of the lens (a good example is faster autofocus).

In order to apply the firmware correctly, rather than the one already installed, you should check that the lens is attached to the camera body, copy a compatible update to a memory card, and insert it into the camera.

From the device’s menu, browse to the Firmware Upgrade section and enable the new firmware. Since each device has multiple ways to enter update mode and specific steps to take to upgrade successfully, you must make sure to read the installation guide for your product.

So if you are considering installing this current version, click the download button to get the firmware and apply it. Also, don’t forget to check our website often so you don’t miss any future releases.