Download Download NIKKOR Z 24-70mm f/2.8 S Lens Firmware 1.20 for macOS for Mac Free

Variety:

– Added support for linear focus ring rotation during manual focus: when [Non-linear] He was elected [Focus ring rotation range] * in camera [CUSTOM SETTINGS MENU]rotating the ring by the selected amount will shift focus from minimum distance to infinity, regardless of rotation speed.
– Added pair [Switch focus/control ring roles] * in camera [CUSTOM SETTINGS MENU].

Check the lens firmware version:

– Attach the lens to the camera and turn on the camera.
– Press the camera MENU button and select SETUP MENU > Firmware Version to display the camera and lens firmware versions.
– Check the firmware version.
– Turn off the camera.

To update lens firmware:

– Create a folder on your computer’s hard drive, name it whatever you want, and download the firmware there.
– Run the package to extract the lens firmware file (.bin).
– Using the card slot or card reader, copy the .bin file to a memory card formatted in the camera.
– NOTE: Be sure to copy the firmware to the root (topmost) directory of the memory card. If the new firmware is placed in a folder under the root directory, the camera will not recognize the new firmware.
– Insert the memory card into the camera and turn on the camera.
– Select SETUP MENU > Firmware version and follow the on-screen instructions to perform a firmware update.
– When the update complete message is displayed, turn off the camera and remove the memory card.
– Turn on the camera and confirm that the firmware has been updated to the new version.

Regarding the lens update:

Upgrading or downgrading a lens to a different firmware version may improve the overall performance and stability of the device, as well as improve certain features of the lens (a good example is faster autofocus).

In order to apply the firmware correctly, in addition to the firmware already installed, you should check that the lens is connected to the camera body, copy the compatible update to the memory card, and insert it into the camera.

From the device’s menu, browse to the Firmware Upgrade section and enable the new firmware. Since every device has multiple ways to enter update mode and specific steps you should take to successfully upgrade, you must make sure to read the product’s installation guide.

So, if you are considering installing this current version, click the download button to get the firmware and apply it. Also, don’t forget to check our website frequently so as not to miss any future releases.