Download Download Lexmark C3224 MFP Firmware CSLBL.075.272/BL.075.E009 for OS Independent Free

Firmware upgrade warning:
-If the current code level on the device is based on FW2 or FW3, it may take up to 20 minutes to update the device to FW7 code
-This is a one-time issue of the device transitioning from FW2 or FW3 to FW7
-To find out whether the device is currently running code based on FW2 or FW3, check the firmware version on the device. Codes based on FW2 and FW3 will have the following version formats: ATL.03x.yyy or ATL.02x.yyy, CB.03x.yyy or CB.02x.yyy, PP.03x.yyy or PP.02x.yyy, YK. 03x.yyy or YK.02x.yyy

Firmware upgrade process:

-Devices running ATL.03x.yyy or ATL.02x.yyy firmware (CS72x/CX72x and equivalent) must first be updated to the intermediate version, and then updated to FW7
-The required intermediate version is CSTAT.041.090 or CXTAT.041.090, from where the firmware can be directly updated to FW7
-Contact Lexmark Technical Support for this version

Firmware downgrade warning:

-It is strongly recommended not to perform a firmware downgrade.
-Downgrading the firmware from the newer main firmware EC to the older main firmware EC will result in loss of applications, security functions and settings.
-Contact Lexmark Technical Support and refer to Knowledge Base article SO8017 for more information on the impact of the downgrade.
-Make sure that the firmware you download is the correct firmware for the product you have

Understand the firmware nomenclature:

Starting from FW4, the firmware version is named in the pattern ABCDD.xxy.zzz, where:
-A tells the printer whether it is monochrome or color (M = monochrome, C = color)
-B tells whether the printer is single-function or multi-function (S = single-function printer (SFP), X = multi-function printer (MFP))
-C indicates whether the UI is a touch screen, a non-touch screen, or a “lite feature set” (T = touch screen, 4.3-inch or larger screen, N = non-touch screen and non-lite version, L = lite version)
-DD ​​told the model family
-xx indicates the main firmware EC version, and y indicates the minor firmware EC version (050 = FW5.0, 051 = FW5.1, etc.)
-zzz tells the version number of the firmware EC
-The FW2 or FW3 firmware version is named with the pattern DD.xxy.zzz using the same mapping as above.However, the DD model series used on FW2 and FW3 has changed on FW4 and newer versions: ATL on FW2 and FW3 changed to AT on FW4 and newer versions, and CB on FW2 and FW3 changed on FW4 and newer versions For AT, YK on FW2 and FW3 becomes PP FW4 and newer on FW2 and FW3
-Make sure that the firmware you download is the correct firmware for the product you have

About printer and scanner firmware:

Before considering installing this firmware, please go to the system information page of the device and make sure that the currently installed version is not updated or does not match this version.

If you upgrade to this version, the imaging device can get print and scan quality improvements, new options added in the settings menu, feature enhancements, various fixes, and other changes that can improve stability.

Considering the large number of devices and manufacturers, as well as the various ways to upgrade imaging devices, we recommend that you read the installation steps and start the firmware update process only after you are familiar with the process.

In addition, it is best to perform this task in a stable power supply environment, such as an environment ensured by a UPS unit. In addition, please make sure not to turn off the power of the imaging device or use its buttons during the installation process to avoid any malfunction.

Therefore, if you plan to apply this version, click the download button and install the package. Please remember to check our website as much as possible, so as not to miss any new version.