Download Download Lexmark CS310dn MFP Firmware 081.225 for OS Independent Free

Firmware upgrade warning:
– If the current code level on the device is based on FW2 or FW3, it may take up to 20 minutes to update the device to FW7 code
– This is a one-time issue transitioning a device from FW2 or FW3 to FW7
– To find out if a device is currently running FW2 or FW3 based code, check the firmware version on the device. Codes based on FW2 and FW3 will have the following release formats: ATL.03x.yyy or ATL.02x.yyy, CB.03x.yyy or CB.02x.yyy, PP.03x.yyy or PP.02x.yyy, YK. 03x.yyy or YK.02x.yyy

Firmware downgrade warning:

– Devices manufactured with xxxxx.080.001 or newer firmware cannot downgrade firmware below the manufacturing level
– For all other devices, it is strongly recommended not to perform a firmware downgrade
– Downgrading firmware from a newer primary firmware EC to an older primary firmware EC will result in loss of applications, security features and settings.
– Contact Lexmark Technical Support and refer to KB article SO8017 for more information on the impact of the downgrade.
– Make sure the firmware you download is the correct firmware for the product you own

Learn about firmware nomenclature:

Starting from FW4, firmware versions are named with the pattern ABCDD.xxy.zzz, where:
– A indicates whether the printer is monochrome or color (M = monochrome, C = color)
– B indicates whether the printer is a single function printer or a multifunction printer (S = single function printer (SFP), X = multifunction printer (MFP))
– C indicates whether the UI is touchscreen, non-touchscreen or “reduced feature set” (T=touchscreen, 4.3″ or larger screen, N=non-touchscreen and non-lite, L=lite)
– DD tells the model family
– xx indicates major firmware EC version and y indicates minor firmware EC version (050 = FW5.0, 051 = FW5.1, etc.)
– zzz tells the version number in the firmware EC
– FW2 or FW3 firmware versions are named with the pattern DD.xxy.zzz using the same mapping as above.However, the DD model family used on FW2 and FW3 changes on FW4 and newer: ATL on FW2 and FW3 becomes AT on FW4 and newer, CB on FW2 and FW3 changes to FW4 and newer For AT, YK becomes PP on FW2 and FW3 FW4 and newer
– Make sure the firmware you download is the correct firmware for the product you own

About Printer and Scanner Packs:

Windows operating systems usually apply generic drivers that enable the computer to recognize the printer and use its basic functions. In order to benefit from all available features, the appropriate software must be installed on the system.

If you intend to apply this driver, you must ensure that the current software package is available for your device model and manufacturer, and then check that the version is compatible with your computer’s operating system.

If this is the case, please run the available installer and follow the on-screen instructions for a complete and successful installation. Also, don’t forget to perform a reboot so that all changes will take effect properly.

Keep in mind that we do not recommend installing any software on platforms other than those specified, even though other operating systems may be compatible.

If you are sure this version is what you need, all you have left to do is click the download button and install the package. If not, please check back on our website so you don’t miss the version required for your system.