Download Download MikroTik RouterOS ARM Firmware 7.14 Beta 7 for OS Independent Free

What’s new in 7.14beta7:

-rose-storage – Move SMB service into RouterOS bundle;
– smb – removed the old SMB service (replaced by the newer and faster ROSE SMB service);
– bth – Added simple “Back to Home User” manager under IP/Cloud menu;
– Internet of Things – LoRa CUPS improvements;
– lte – Fixed MBIM interface to support Quectel EC25 modem (introduced in v7.13);
– Routes – Fixed route locking issue when loading a large number of routes on ARM64 (introduced in v7.14beta4);
– sms – Moved LTE SMS read settings from “/tool/sms” to “/interface/lte” menu and migrated old configuration (CLI only);
– vlan – Fixed non-operational VLAN interface after MTU change failure;
– winbox – all columns under the “Routing/PIM SM/Static RP” menu are displayed by default;

Other changes since v7.13:

– 6to4 – Make “ipsec-secret” sensitive parameter;
– api – Improved the stability of REST API when handling invalid requests;
– api – correctly returns SNMP OID when requested;
-arm – Improved system stability when using microSD on RB1100Dx4;
– arp – ARP status added (CLI only);
– Bridging – Added MLAG support for MSTP bridging;
– Bridge – MVRP support added (CLI only);
– bridging – Fixed automatic “path cost” for bonded interfaces (introduced in v7.13);
– Bridge – Improved bridge VLAN configuration validation;
– Bridging – Improved configuration speed of large VLAN setups;
– Bridge – Improved protocol mode MSTP functionality;
– Bridging – Improved protocol mode STP and RSTP functionality;
– Bridge – Set “point-to-point=yes” default for non-wireless bridged ports;
– Bridge – Attempts to automatically set a wireless bridge port as an edge port;
– calea – Improved system stability when adding bridge rules without “calea” package installed;
– Console – Added “:tolf” and “:tocrlf” commands for converting newlines to LF or CRLF;
– Console – Added missing “where” clause to “/ipv6/firewall/filter” table print command;
– Console – “:delay” command does not accept negative or too large values;
– Console – Do not allow out-of-range values ​​for time type fields;
– Console – Fix configuration export when user does not have “sniff” policy;
– Console – The reset command help prompts that the “run after reset” parameter requires “.rsc file”;
– Console – Improved editor functionality in full screen mode;
– Console – Increased the maximum file content length manageable via the command line to 60 KB;
– Console – Update copyright statement;
– Containers – Improved VETH interface management responsiveness and reliability;
– Container – Restrict users without “write” permission to use the “/container/shell” menu;
– defconf – do not add loopback interface to bridge port (introduced in v7.14beta3);
– defconf – Fixed wifi configuration when interface MAC address changes;
– defconf – increase LTE interface waiting time;
– defconf – Use the “fq_codel” queue as the default interface queue for wired ports on LTE devices;
– dhcpv6-client – Install dynamic IPv6 blackhole routing in the corresponding routing table;
– Disk – exFAT and NTFS mount/read/write support added (CLI only);
– Disks – properly unmount disks when disconnected;
– dns – If “cache size” is reached, do not add new entries to the cache;
– dns – Fixed domain name search and resolution for internal services;
– Ethernet – Improved cable test reliability for hAP ax3 PoE output ports;
– Ethernet – Fixed a minor memory leak when processing packets;
– fetch – HTTP does not require “content-length” (introduced in v7.13);
– fetch – Fixed DNS resolution when domain only has AAAA entries (introduced in v7.13);
– Fetch – Fixed fetch when using “src-path” in HTTP/HTTPS mode (introduced in v7.13);
– fetch – Fixed IPv4 address logging (introduced in v7.13);
– fetch – timeout when fixed content length is 0 (introduced in v7.14beta4);
– Fetch – Improved fetch stability in SFTP mode;
– fetch – Improved the stability of file downloading in HTTP/HTTPS mode;
– Get – less detailed logging;
– fetch – Treat any 2xx HTTP return code as successful (introduced in v7.13);
– File System – Improved file system integrity on multiple RB3011 units through automatic firmware upgrades;
– Firewall – Added “Creation Time” parameter to IPv6 address list entries;
– Firewall – Increased default “udp-timeout” value from 10 seconds to 30 seconds;
– Health – Improved fan control on CRS3xx and CCR1016-12S-1S+r2;
– Internet of Things – Added LoRa CUP protocol support;
– Internet of Things – Fixed some modbus frame reception issues;
– Internet of Things – Improved LoRa LNS;
– IoT – improved modbus Tx/Rx switching behavior;
– l3hw – Fixed neighbor offloading after link flapping;
– l3hw – preserve VLAN offload when bridge port is down;
– LED – RGB power LED not used for unconfigured LTE modems to display LTE connection status/mode;
– LED – Fixed “type=on” LED behavior after reboot;
– LED – Fixed default LTE LED configuration of wAPR-2nD;
– LED – fixed wireless type LED trigger using WiFi packaged router;
– lte – Added AT channel support for Quectel EM120K-GL modem;
– lte – Do not copy the main band for Castle 5G in 5G SA mode;
– lte – Fixed “use-peer-dns” setting for EC200A modem;
– lte – Fixed an issue where the IPv6 address of the EC200A modem could be added as an IPv4 address;
– lte – Fixed support for configurationless modem detection (introduced in v7.13);
– lte – Fixed USB mode switch and initialization race condition for unconfigured USB modems;
– lte – improved modem recovery after IPv4 configuration failure;
– lte – improved support for “ACER” and “MSFT” brand EM12-G modems;
– lte – Reconstruct AT command control of AT modem;
– Modem – Fix SMS deletion (introduced in v7.13);
– mpls – Fixed VPN fragmentation when forwarding IP traffic;
– ovpn – Added support for push routing;
– ovpn – improved key renegotiation process;
– ovpn – Improved the OVPN configuration file import process;
– poe-out – Improved PoE output reliability on routers with a single PoE output interface;
– Ports – Fixed support for USB/Serial adapters (introduced in v7.13);
– Ports – Removed fake serial ports on RB750Gr3, RB760iGS and RBM11G devices;
– ppp – Added support for “WISPr-Session-Terminate-Time” RADIUS attribute;
– ppp – Log an error when the IPv6 DHCP pool is exhausted;
– qos-hw – Fixed ‘tx-queue7-packet’ counter;
– Routes – Improved route printing “count only” processing speed;
– Routes – Improved the stability of route table lookup;
– Route Filters – Added option to set “isis-ext-metric”;
– Router Board – Added “reset button” support for RBwAPR-2nD devices;
– sfp – Added support for modules requiring single-byte I2C read transactions;
– sfp – improve high-power SFP module initialization;
– sfp – Improved combined sfp handling of CRS328-4C-20S-4S+;
– sfp – Improved link establishment for RB4011 devices;
– smips – improved system stability (introduced in v7.14beta4);
– SMS – Improved system stability when using SMS;
– snmp – Hide “MikroTik” in LLDP MIB when using brand with Hide SNMP option;
– ssh – Improved SSH performance on ARM, MIPS, MMIPS, SMIPS and TILE devices;
– ssh – Reconstructed the internal process of SSH service;
– Switches – Fixed an issue with “vlan-mode” and “default-vlan-id” attributes being reset after reboot (introduced in v7.14beta3);
– Switch – Improved 100G interface stability for 98DX4310 and 98DX8525 switches;
– Switch – Minimizes potential packet overflow on CRS354;
– System – Changed build time format according to ISO standards;
– system – exposes the “lo” and “vrf” interfaces;
– System – Improved memory allocation for ARM64 devices;
– System – Improved RAM allocation of L009UiGS-RM;
– System – Improved system stability when processing packets in FastPath (introduced in v7.13);
– System – Provide a more accurate “Total Memory” value for ARM devices;
– System – Provides a more accurate “Total Memory” value under the “System/Resources” menu for L009 and hAP ax lite routers;
– tftp – improved invalid request handling;
– Time Zone – Updated time zone information in the “tzdata2023d” version;
– tr069 – Do not copy cellular information in “X_MIKROTIK_5G” node when connecting in NR SA mode;
– tr069 – fixed bandwidth test;
– tr069-client – Display 5G signal information only in the X_MIKROTIK_5G node in the 5G NSA frequency band;
– USB – Shows “Supermicro CDC” adapter as Ethernet interface;
– vrf – prevent VRF interface name from conflicting with interface list;
– vxlan – Fixed underlay tunneling reusing encapsulated packet route markers;
– wifi – “station-pseudobridge” interface mode added (CLI only);
– wifi – Fixed issue with setting country profiles (introduced in v7.13.1);
– wifi – Increase the SAE retransmission period value to 3 seconds to improve WPA3 compatibility with IoT client devices;
– wifi – use “Latvia” as the default value for the “country” attribute;
– wifi – use correct CAP identity for interface name configuration after changing via remote-cap/set-identity;
– wifi-qcom – Fixed new connections when the maximum number of MAC addresses supported behind a connected station bridge is reached;
– winbox – added “accept-protocol-version” parameter in L2TP server settings;
– winbox – Added “Mode Button” and “Switch” menu for L41G-2axD&FG621-EA;
– winbox – Added “name” parameter under “Tools/Network Monitoring” menu;
– winbox – added “page refresh” setting in graphics settings;
– winbox – Added “Port Cost Mode” setting under “Bridge” menu;
– winbox – Added “VRF” parameter under “Tools/Ping” menu;
– winbox – Added “x25519” parameter for “DH Group” parameter under “IP/IPsec/Profiles” menu;
– winbox – added missing “Protocol” parameter under “IPv6/Firewall” menu;
– winbox – added missing monitoring properties under “WireGuard/Peers” menu;
– winbox – Added preboot ethernet boot setting in system/routerboard/settings menu;
– winbox – do not display USB settings for unnecessary CRS devices;
– winbox – Fixed “Bridge Cost” range under “Interface/VPLS” menu;
– winbox – Fixed the “Password” button under the “Quick Settings” menu;
– winbox – improved connection speed and reliability;
– winbox – Improved the automatic refresh process of routing tables for static routes;
– winbox – Improved system stability for large data packets;
– winbox – include “te-tunnel” parameter in VPLS interface monitor;
– winbox – Correctly verify “pass-through subnet size” in LTE APN settings;
– winbox – Delete the “Root Bridge ID” attribute under the “Bridge/MSTI” menu;
– winbox – Removed “sfp all” option from combo port settings;
– winbox – renamed “Wireless Desk” menu to “Wifi”;
– winbox – The “Routing Table” column is displayed under the IP/Routing menu by default;
-wireguard – disallows the use of multiple WireGuard interfaces on the same “listening port”;
-wireguard – Optimized and improved WireGuard service logging;
– x86 – fixed VLAN tagged packet transmission for igb (introduced in v7.12);

About router firmware:

Before you consider downloading this firmware, go to your router’s System Information page and make sure the version currently installed is not a newer version or matches this version.

Since there are many different router models and different ways to upgrade your device, it is highly recommended that you read and most importantly understand the installation steps before applying the new firmware, even if you are an advanced user.

In theory, these steps shouldn’t be too much trouble for anyone, as manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you have to upload new firmware to the router through the router’s admin page and allow it to upgrade.

If you install a new version, you can expect higher security levels, resolution of different vulnerability issues, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, and several other changes.

If you are looking for some security measures, keep in mind that it is better to perform uploads using an Ethernet cable rather than a wireless connection, as wireless connections can be easily interrupted. Also, if you want to avoid any glitches, make sure not to power off the router or use its buttons during the installation process.

If the firmware meets your current needs, obtain the required version and apply it to your router unit; if not, visit our website as often as possible to avoid missing updates that improve your device.