Download Download Intel Ethernet Connections Boot Driver/Utility 26.0 for Linux for Linux Free

New software support:

-Summarized the reception error counter of the i40e driver.
-The aggregate reception error counter of the ixgbe driver.
-i40e FreeBSD driver—When the VLAN_HWFILTER flag is enabled on the interface and there are not enough hardware resources available to filter all configured VLANs, the driver will disable hardware filtering and enable the operating system or other software to filter VLAN tags.

Issues that have been fixed for the Intel Ethernet 700 series:

-PROSet: When the Intel Ethernet controller has established a connection and is bound to the virtual adapter, the connection test result will show “TCP/IP protocol not configured” instead of “Because the device is bound to the virtual NIC, this test cannot be run “.
-PROSet: In the “Adapter Information” tab, the “Negotiated Link Speed” text is truncated. Only the first word is displayed. Only exists when German is used.
-PROSet: A difference in team settings was observed between DMIX and PROSet ACU. A different check time default value (in seconds) is used.
-Linux driver: After enabling DCB, use the ethtool –set-priv-flags ethX disable-fw-lldp on command to dynamically switch LLDP/DCBX from firmware to software ownership, the problem will cause dmesg error messages and incorrect DCB configuration . Possible solutions: 1. Reload the Linux driver and/or 2. Close and re-enable the switch port connected to the affected adapter port.
-Linux driver: using all queues to create a traffic class (TC) through the application device queue (ADQ) function may cause network connection loss.
-Linux driver: When using the SR-IOV hypervisor management interface (VF-d), the ip_link_spoof option is not available.
-Linux driver: For XDP redirection function, when combined with ethtool -L [N] Option, the traffic received on the Tx side is almost half of the data packets received on the Rx. When checking netstat, no corresponding packet drop occurred.
-Linux driver: For Precision Time Protocol (PTP), there is no synchronization when SMA1 (GPIO_4) is input for 1PPS signal.
-Linux driver: If VF is disabled through the SR-IOV hypervisor management interface (VF-d), it cannot be enabled again.
-Linux driver: If the driver is uninstalled while the virtual machine is running traffic, running two virtual machines with multiple virtual machines may cause a restart and display a general protection error.
-Linux driver: Express Data Path-On the latest kernel, the system may hang after loading the eBPF program.
-Linux driver: Auto negotiation cannot be disabled on Intel Ethernet Controller V710 for 5GBASE-T.
-Linux RDMA driver: When the number of connections is greater than 16000, the probability of system crash during RDMA CM connection and simple ping-pong test (ucmatose) is about 25%.

Fixed issues with Intel Ethernet 500 series:

-Fixed: On kernel 5.8.5 or later, call traces are observed when loading xdp_redirect or xdp_tx.
-Fixed: On Intel server system R2208WFQ with Intel Ethernet network connection OCP X527, inventory flow may be lost.
-PROSet: When the Intel Ethernet controller has established a connection and is bound to the virtual adapter, the connection test result will show “TCP/IP protocol not configured” instead of “Because the device is bound to the virtual NIC, this test cannot be run “.
-PROSet: In the “Adapter Information” tab, the “Negotiated Link Speed” text is truncated. Only the first word is displayed. Only exists when German is used.

Issues that have been fixed for the Intel Ethernet 300 series:

-PROSet: When the Intel Ethernet controller has established a connection and is bound to the virtual adapter, the connection test result will show “TCP/IP protocol not configured” instead of “Because the device is bound to the virtual NIC, this test cannot be run “.
-PROSet: In the “Adapter Information” tab, the “Negotiated Link Speed” text is truncated. Only the first word is displayed. Only exists when German is used.

This download is valid for the products listed below:

-Intel 10 Gigabit AT Server Adapter
-Intel 82579LM Gigabit Ethernet PHY
-Intel 82579V Gigabit Ethernet PHY
-Intel 82580DB Gigabit Ethernet Controller
-Intel 82580EB Gigabit Ethernet Controller
-Intel 82583V Gigabit Ethernet Controller
-Intel 82599EB 10 Gigabit Ethernet Controller
-Intel 82599EN 10 Gigabit Ethernet Controller
-Intel 82599ES 10 Gigabit Ethernet Controller
-Intel Boot Agent
-Intel Ethernet connection I217-LM
-Intel Ethernet connection I217-V
-Intel Ethernet connection I218-LM
-Intel Ethernet connection I218-V
-Intel Ethernet connection I219-LM
-Intel Ethernet connection I219-V
-Intel Ethernet Connection X557-AT
-Intel Ethernet Connection X557-AT2
-Intel Ethernet Connection X557-AT4
-Intel Ethernet Controller E810-CAM1
-Intel Ethernet Controller E810-CAM2
-Intel Ethernet Controller E810-XXVAM2
-Intel Ethernet Controller I210-AS
-Intel Ethernet Controller I210-AT
-Intel Ethernet Controller I210-CL
-Intel Ethernet Controller I210-CS
-Intel Ethernet Controller I210-IS
-Intel Ethernet Controller I210-IT
-Intel Ethernet Controller I211-AT
-Intel Ethernet Controller I225-IT
-Intel Ethernet Controller I225-LM
-Intel Ethernet Controller I225-V
-Intel Ethernet Controller I350-AM2
-Intel Ethernet Controller I350-AM4
-Intel Ethernet Controller I350-BT2
-Intel Ethernet Controller V710-AT2
-Intel Ethernet Controller X540-AT2
-Intel Ethernet Controller X540-BT2
-Intel Ethernet Controller X550-AT
-Intel Ethernet Controller X550-AT2
-Intel Ethernet Controller X550-BT2
-Intel Ethernet Controller X710-AM2
-Intel Ethernet Controller X710-AT2
-Intel Ethernet Controller X710-BM2
-Intel Ethernet Controller X710-TM4
-Intel Ethernet Controller XL710-AM1
-Intel Ethernet Controller XL710-AM2
-Intel Ethernet Controller XL710-BM1
-Intel Ethernet Controller XL710-BM2
-Intel Ethernet Controller XXV710-AM1
-Intel Ethernet Controller XXV710-AM2
-Intel Ethernet Converged Network Adapter X520-DA1
-Intel Ethernet Converged Network Adapter X520-DA2
-Intel Ethernet Converged Network Adapter X520-LR1
-Intel Ethernet Converged Network Adapter X520-QDA1
-Intel Ethernet Converged Network Adapter X520-SR1
-Intel Ethernet Converged Network Adapter X520-SR2
-Intel Ethernet Converged Network Adapter X520-T2
-Intel Ethernet Converged Network Adapter X540-T1
-Intel Ethernet Converged Network Adapter X540-T2
-Intel Ethernet Converged Network Adapter X550-T1
-Intel Ethernet Converged Network Adapter X550-T2
-Intel Ethernet Converged Network Adapter X710-DA2
-Intel Ethernet Converged Network Adapter X710-DA4
-Intel Ethernet Converged Network Adapter X710-T4
-Intel Ethernet Converged Network Adapter XL710-QDA1
-Intel Ethernet Converged Network Adapter XL710-QDA2
-Intel Ethernet Network Adapter E810-CQDA1
-Intel Ethernet Network Adapter E810-CQDA1 for OCP
-Intel Ethernet Network Adapter E810-CQDA1 for OCP 3.0
-Intel Ethernet Network Adapter E810-CQDA2
-Intel Ethernet Network Adapter E810-CQDA2 for OCP 3.0
-Intel Ethernet Network Adapter E810-XXVDA2
-Intel Ethernet Network Adapter E810-XXVDA2 for OCP 3.0
-Intel Ethernet Network Adapter E810-XXVDA4
-Intel Ethernet Network Adapter I350-T4 for OCP 3.0
-Intel Ethernet Network Adapter X710-DA2 for OCP 3.0
-Intel Ethernet Network Adapter X710-DA4 for OCP 3.0
-Intel Ethernet Network Adapter X710-T2L
-Intel Ethernet Network Adapter X710-T2L for OCP 3.0
-Intel Ethernet Network Adapter X710-T4L
-Intel Ethernet Network Adapter X710-T4L for OCP 3.0
-Intel Ethernet Network Adapter X722-DA2
-Intel Ethernet Network Adapter X722-DA4
-Intel Ethernet Network Adapter XXV710-DA1
-Intel Ethernet Network Adapter XXV710-DA1 for OCP
-Intel Ethernet Network Adapter XXV710-DA2
-Intel Ethernet Network Adapter XXV710-DA2 for OCP
-Intel Ethernet Network Connection I347-AT4
-Intel Ethernet Server Adapter I210-T1
-Intel Ethernet Server Adapter I340-F4
-Intel Ethernet Server Adapter I340-T4
-Intel Ethernet Server Adapter I350-F2
-Intel Ethernet Server Adapter I350-F4
-Intel Ethernet Server Adapter I350-T2
-Intel Ethernet Server Adapter I350-T2V2
-Intel Ethernet Server Adapter I350-T4V2
-Intel Ethernet Server Adapter X520-DA1 for Open Computing Project
-Intel Ethernet Server Adapter X520-DA2
-Intel Ethernet Server Adapter X520-DA2 for Open Computing Project
-Intel Ethernet Server Adapter X710-DA2 for OCP
-Intel Ethernet Server Adapter XL710-QDA1 for Open Computing Project
-Intel Ethernet Server Adapter XL710-QDA2 for Open Computing Project
-Intel Ethernet Server Bypass Adapter X520-LR2
-Intel Ethernet Server Bypass Adapter X520-SR2
-Intel Ethernet Server Bypass Adapter X540-T2
-Intel Gigabit CT Desktop Adapter
-Intel Gigabit EF Dual Port Server Adapter
-Intel Gigabit Ethernet ET Dual Port Server Adapter
-Intel Gigabit ET2 Quad Port Server Adapter
-Intel Gigabit VT Quad Port Server Adapter
-Intel PRO/100 M Desktop Adapter
-Intel PRO/100 S Desktop Adapter
-Intel PRO/100 S Dual Port Server Adapter
-Intel PRO/100 S Management Adapter
-Intel PRO/100 S server adapter
-Intel PRO/100+ adapter
-Intel PRO/100+ management adapter
-Intel PRO/100+ server adapter
-Intel PRO/1000 GT Desktop Adapter
-Intel PRO/1000 MF Dual Port Server Adapter
-Intel PRO/1000 MF Server Adapter
-Intel PRO/1000 MF Server Adapter (LX)
-Intel PRO/1000 MT Desktop Adapter
-Intel PRO/1000 MT Dual Port Server Adapter
-Intel PRO/1000 MT four-port server adapter
-Intel PRO/1000 PF Dual Port Server Adapter
-Intel PRO/1000 PT Desktop Adapter
-Intel PRO/1000 PT dual port server adapter
-Intel PRO/1000 PT four-port slim server adapter
-Intel PRO/1000 PT four-port server adapter
-Intel PRO/1000 XF Server Adapter
-Intel PRO/1000 XT Thin Server Adapter
-Intel PRO/1000 XT Server Adapter

About the network adapter driver:

After connecting, the operating system usually installs a universal driver to help the computer recognize the newly connected device.

However, if you want to take advantage of all the functions available on the network adapter, you must apply the appropriate software. This task also enables the computer to correctly identify all device characteristics, such as manufacturer, chipset, technology, etc.

Updating the adapter’s driver and utility version may improve overall performance and stability, increase transmission speed, fix different compatibility issues and some network-related errors, and bring various other changes.

To install this version, simply obtain the package, unzip it if necessary, run the installer, and follow the instructions displayed on the screen. When you are done, don’t forget to perform a system restart and reconnect the network adapter to ensure that all changes take effect.

Without further ado, if you plan to apply this version, please click the “Download” button and install the package. In addition, please visit our website as often as possible to ensure that you do not miss a new version.