Download Download NVIDIA Mellanox MNV303611A-EDLT SmartNIC Firmware 16.28.1002 for OS Independent Free

Important notes:

-Security reinforcement enhancement: This version contains important reliability improvements and security reinforcement enhancements. Mellanox recommends upgrading your device firmware to this version to improve the device’s firmware security and reliability.
-When upgrading or changing the configuration on a multi-host adapter card, for the changes to take effect, PCIe restarts must be sent from both hosts (servers) at the same time. To do this, do the following: 1. The server with the auxiliary card is turned off, 2. The server with the main card is turned off, 3. The server with the main card, 4. The server card with the auxiliary card.
-SR-IOV-Virtual function (VF) per port-The maximum virtual function (VF) per port is 127.

Changes and new features:

-Added support for streaming sampling and mirroring using related functional software.
-Increase the maximum number of XRQs to 512.
-Added the following new mlxconfig parameters in the non-volatile configuration section: log_max_outstandng_wqe and ece_disable_mask
-Implemented the following new commands in the NS-SI 1.2 specification: get IB link status, get IB statistics, and get PF allocation
-Add the following segments that appear in the PRM to the resource dump: PRM_QUERY_QP, PRM_QUERY_CQ, PRM_QUERY_MKEY and QUERY_VNIC_ENV

Bug fix:

-Enable Bar configuration byte by byte by applying the write_en bit mask.
-Fixed an issue in UC traffic that prevented the counting of out-of-sequence packets at the responder.
-Fixed the issue of low PXE performance when using VSC to trigger send_ring_doorbells.
-pdated multi_prio_sq is as follows: SmartNIC: ECPF only, multi-host/single host: PF is supported. Unless PF is explicitly disabled, VF should also be enabled, and only UID = 0
-Fixed an issue related to counting CNP packets.
-Fixed an issue that caused data packets to get stuck when the rate limiter was enabled.
-Fixed a rare issue related to MCTP pass-through packets. If sent when the PCI link is not ready, the issue will cause the PCI boot sequence to fail.
-Fixed an issue related to the internal caching mechanism of the iRISC processor that caused context damage.
-Enable Bar configuration byte by byte by applying the write_en bit mask.
-Fixed an issue in UC traffic that prevented the counting of out-of-sequence packets at the responder.
-Fixed the issue of low PXE performance when using VSC to trigger send_ring_doorbells.
-Fixed an issue related to counting CNP packets.
-Fixed an issue that caused fragmented IP packets to be dropped.
-Added the option of using NC-SI cmd to set the unicast MAC in the MAC address to establish OS to BMC pass-through.
-Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.
-Fixed an issue that caused PCI atoms on ETH to be released as regular atomic operations.

About the network adapter driver:

After connecting, the operating system usually installs a universal driver to help the computer recognize the newly connected device.

However, if you want to take advantage of all the available functions of the network adapter, you must apply the appropriate software. This task also allows the computer to correctly identify all device characteristics, such as manufacturer, chipset, technology, etc.

Updating the adapter’s driver and utility version may improve overall performance and stability, increase transmission speed, fix different compatibility issues and some network-related errors, and bring various other changes.

To install this version, simply obtain the package, unzip it if necessary, run the installer, and follow the instructions displayed on the screen. When you are done, don’t forget to perform a system restart and reconnect the network adapter to ensure that all changes take effect correctly.

Without further ado, if you plan to apply this version, please click the download button and install the package. In addition, please visit our website as often as possible so as not to miss any new versions.