Download Intel D50TNP2MFALAC Server System SysInfo Utility 14.2.07 Free

System Information Retrieval Utility (SysInfo) is used to collect system information.

The utility dumps the following information into the log file:

-Platform firmware list
-Sensor information
-Sensor data logging
-Substrate FRU
-System BMC boot sequence
-BMC user settings
-BMC LAN channel settings
-BMC SOL channel settings
-BMC power restore policy setting
-BMC channel settings
-SMBIOS type 1, type 2, type 3
-processor
-Memory
-Operating system information
-IDESCSI
-Hard Disk
-Device manager information (aka driver)
-List of installed software
-BIOS setup (each BIOS SETUP F2 screen).
-RAID settings and RAID logs (not available on Windows and Linux)
-Operating system event log
-SATA
-PCI bus device information
-Power telemetry (if available)

Supported platforms:

-Intel Server System M50CYP (Coyote Pass)
-Intel Server System D50TNP (Tennessee Pass)

Supported operating systems:

-UEFI Shell
-WinPE 4.0 (x64)
-Windows Server 2019
-Windows Server 2016
-Windows Server 2012 R2
-Windows 10
-RHEL 6.8 (x64)
-RHEL 7.3
-RHEL 7.5
-RHEL 7.6
-RHEL 8.0
-SLES 11.4 (x64)
-SLES 12.2
-SLES 15&Sp1
-CentOS 7.3 (x64)
-Debian 8.10

About the adjustment utility:

Install this adjustment utility, you will be able to manually configure various overclocking values, such as CPU and memory frequency, system clock, fan speed, and monitor the temperature of different components.

However, please note that you should only adjust these settings between the supported ranges; changing the configuration to extreme values ​​without an additional cooling system may severely damage the components.

The installation steps required to apply the software are very easy: get the downloadable software package, unzip it if necessary, run the available installer, and carefully follow all the instructions displayed to complete a complete and successful installation.

In addition, please note that it is recommended that you restart the system so that all changes take effect correctly. Please keep in mind that even though other operating systems may be compatible, we do not recommend that you install this version on platforms other than the highlighted operating system.

That is, click the download button to get the software package and set this function on the system. For more information on the latest version, please continue to visit our website to “keep up to date one minute ago”.